Question about Panasonic TH-50PX60U 50 in. Plasma HDTV

1 Answer

Plasma TV My plasma screen just went black while watching cable tv. The cable box seems fine. The tv screen goes black and the red light for the power button on the tv starts blinking. I try turning the tv off, then back on to no avail. I also tried unplugging the power supply. No help. I turn on the tv, the screen stay black with no pic, and the power light flashes. Please help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 790 Answers
Re: Plasma TV

Did you hear the sounds? or maybe you have defective power source in hot side..

Posted on Oct 02, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


6 Points

Related Questions:

1 Answer

Got a Samsung dnie model code spp4251x/data tv when powering up the front light comes on but no picture or anything anyone got some good info??

tv seems to turn on but no picture? - Forums - CNET > Forums > Samsung

CNETJun 11, 2015 - ... Samsung Dlp TV (HLR-5067W) it seems like the TV turns on butthere is no picture. ... the lamp is, light is visible from where the lamp is located but no picture. DLP Twon't turn on, blinking green lamp light then shuts dow ...
Jun 11, 2015
Samsung Plasma TV - Won't turn on
Jun 11, 2015
The timer, lamp, and standby/temp. light are flashing?!
Jun 11, 2015
Samsung TV Keeps Shutting Down
Jun 11, 2015
More results from

TV with Black Blank Screen Repair How to Troubleshoot ...

? 3:16
May 8, 2014 - Uploaded by
TV Repair Help for a TV With a Black No Image on the Screen ...I Have A Sanyo TV I Can Hear But Black Screen Im 14 And Dont Know What To Do ! .... power button the power light goes from red to green, the screen flashes on then goes black ....Troubleshooting LCD Backlight Failure Samsung LNT-4066 ...

Samsung plasma tv repair blinking light no picture ...

Jan 09, 2016 | Samsung Flat Panel Televisions

1 Answer

Plasma screen suddenly went out

its a lcd ? replace the lcd lamps or the inverter

May 04, 2012 | Panasonic Flat Panel Televisions

2 Answers

I have to much red in my picture


First check whether all the cables from your dishnetwork are fine and connected firmly.If yes then you'll need to pull off the front of the tv, behind the speaker grill there would be a panel. Remove the panel and check for a black box hanging over there. It has 6 controls on it, 3 are marked as focus and 3 as screen. You'll need to adjust the screen. If you turn these too high you can damage a tube. so we are doing real small adjustments. Turn the color off on the tv and adjust the red, blue & green controls up till you get a fine picture. Also adjust the focus until you get a clear picture.

And, if it doesn't resolve your issue then it is an intermittant red picture tube, a bad red driver transistor on the CRT board, a bad connection on the blue crt board, or a problem in the RGB coming from the video jungle IC. This TV set most likely will run you about 200 to 400 bucks to have this problem fixed, unless it is the picture tube.

Please do accept this solution and revert for further assistance.


Jul 13, 2009 | Philips 42PF9631D 42 in. Plasma Television

2 Answers

LG RU-42PX11 42 plasma TV has black bar

The screen does not work properly .Ribbon wire fails.

Mar 31, 2009 | LG 42PX5D 42 in. Plasma HDTV

3 Answers

No picture, sound ok

I have a similar issue. Sometimes the entire screen goes black and sometimes only one-half - either the top or bottom half goes black. The only solution we have found is to gently tap the TV (usually the front side) and the picture will come back for awhile. It almost seems heat related as it only goes out after the first 10 minutes of use. There must be a fix to this.

Aug 25, 2008 | Philips 42PF7320A 42 in. Plasma HDTV

1 Answer

Please Help!! Black Screen, Red Light Flashing

is this a plasma or a dlp tv? if is a dlp a have bad news for you get rid of the tv, if is a plasma then is something different, post the model # anyway to see if we can help you.

Aug 24, 2008 | Samsung FPT5084 50 in. Plasma HDTV

2 Answers


I'd still pick plasma , because it has true black where LCD does not.

better for gamming by a long shot.

can you say WARRENTY :->

May 20, 2008 | Toshiba 42HP83 42 in. HD-Ready Plasma...

5 Answers

Philips 42 in. Plasma shut down

did u cheak the input cables does it do it on dvd input as well as others ?

Feb 01, 2008 | Philips 42PF7320A 42 in. Plasma HDTV

2 Answers

Toshiba Plasma TV Green and Pink (Diffusion?) Problem

I could be wrong but sounds like your plasma display is going bad. What is your model number?

Dec 28, 2007 | Toshiba 42HP66 42 in. LCD Television

1 Answer

Plasma turened off and red light flases twice

Red flashing x2 = Panel power supply fault

It would be easier to replace the power board than attempt a repair at component level (dangerous voltages)

Oct 13, 2007 | Pioneer PureVision PDP-504HDE 43 in....

Not finding what you are looking for?
Panasonic TH-50PX60U 50 in. Plasma HDTV Logo

1,364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

66518 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

charlie rodriguez
charlie rodriguez

Level 2 Expert

151 Answers

Are you a Panasonic Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides