Question about Pioneer GM-X722 Car Audio Amplifier

1 Answer

Instalation of a gm-x622

I bught my amp from a pawn shop with no instruions so im not sure how to conect it up to my cd player and a have got a 10 inch sub to conect to it as well i bought some extra cables ect specker cable n power lead kit so all i really need is a diagram or help to put it together please help im a chick my butt is gettin sore cause i been sittin in my car to long just looking at all the wires. help!!!!!

Posted by on

  • kell77 Oct 02, 2007

    i really just need a diagram to keep on my pc for the instalation of the amp

  • kell77 Oct 07, 2007

    thank you for your help but i already went to that sight and i finaly rang pioneer and they are going to e mail me some instrutions



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Trim God Hey Kell77. Go to this site if you have not already tried this. I found your amp but no manual.,,2076_310069937_36965,00.html If that does not help, Google "Pioneer" and check out each site till you get what you need.I found the manual on this site,but it costs 9 bucks. Maybe you can get it for free if you search around a bit. If you can't find a manual for your exact amp, download a manual for the same model type that is less or more powerful than yours. The wiring diagram for all the GM-X models might be the same. Just use your judgement and caution when wiring it up.

Posted on Oct 06, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I bought a GNX3 from pawn shop, but it doesn't seem to register any input signal coming in to the unit

you will have to have the system checked out and as it came from a pawn shop it likely is not functional as it is/was

Dec 10, 2014 | Music

1 Answer

Where can I find the instruction manual ?

You bought what from a pawn shop? You can type the make and model of your device into a search engine like and add the word "manual" to it---like this:

Brand CD player XX-400 manual

May 05, 2014 | Office Equipment & Supplies

1 Answer

SP OFF mode?

if you turned it on without speakers hooked to it you may have blown the speaker output amps or if the end of the amp remote wire touched a ground you may have burned a trace on the board did you here it play at the pawn shop? or did it just light up? sometimes the people at the pawn shop think if the unit lights up it is working and sometimes they check them is just hook power to them without speakers if so this can blow the speaker output I would take it back to the pawn shop

Jan 29, 2014 | Kenwood KDC-MP235 CD Player

1 Answer

Cd-r does not work in pioneer cd player

you need to get to cdr disk that are for audio

May 03, 2009 | Car Audio & Video

3 Answers

Alpine cda9855R

A new one will come with a new face plate, but you could try checking pawn shops for a used one. Prices will vary.

Aug 19, 2008 | Alpine CDA-9855 CD Player

2 Answers

Reset security code

i bought a audiobahna3551 cd player at the pawn shop and i need the code for it

Jul 30, 2007 | AudioBahn A3351 CD Player

1 Answer

Help pawn shop rapped me

Ok... You need only the iRiver Music Manager Here is a direct link for it. Here is a link to Guide you for copying music using Windows Media Player 10 Only. and here are the manuals you need.. The 7xx Series Maunal (Valid for all players starting with 7) The iRiver Music Manager Manaul Now this is what you need that was on the original CD Disk. Good Luck

May 02, 2007 | iRiver iFP-795 MP3 Player

1 Answer

Pawn shop deal went south has all the software availble to make it work on your p.c. Go to the website and search ifp-795. Download and install the software, you should be fine. You might be prompt in the instalation process... remember "install or continue anyway" good luck.

May 02, 2007 | iRiver iFP-795 MP3 Player

Not finding what you are looking for?
Pioneer GM-X722 Car Audio Amplifier Logo

747 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

The Knight
The Knight

Level 3 Expert

75032 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

78010 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides