Hp 6122 cartrige mech locked on the right side of the printer

Go to start->control panel->printer->right click on the default printer(your mut be deskjet 6122)->go to properties..there you will see print test page

Thanks

It's very easy.
uncover the printer. Then look left and right site of the printer. There you find 2 lock in left and 1 lock in right side. In right side there is a spring tidely back side of the printer. then open all the parts from left side and right side. put of the plastic sensor that are sruck right to left in the back side of the printer. Then put off iron rod into the ink cartrige carrier. Then try to put off cartrige carrier from the printer ( where the carrier is parked). Then look the belt in the back of the cartrige carrier. Then replace it .
Thank you

This might be a problem with the connection or corrupted file, try to cancel the print job and try again. -if your using USB connection try to unplug and replug the cable from the PC and the printer side.

beside left and right has two lock for joint the lock......... connect there

HI.

have you tried hp site for the drivers select your o/s to download.

HP Deskjet 6122 Printer series - Download drivers and software - HP Business Support Center



riz.

Reach in with a looong screwdriver and push the white block down.

With the address highlighted go to Tools, Envelopes, Custom
Enter the custom envelope size
Pick #4 feed method
click OK

Set the feed tray to hold the envelope along the right side.
Insert the envelope with the flap up - push it all the way in.

Print it

If you have Windows Vista, the driver is built in. If you have XP you can download it from:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=83028&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=88749

If you have Win9x you can try to do a web search for file 6122_enu_win9x_me.exe or try:

h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?dlc=en&lc=en&os=20&

This light will blink when the top cover is not properly shut, so the easy first step is to check that the cover is closed properly.

If that does not help, then one of the cartridges is not being recognized. See here to determine which cartrdge is the issue.

You can then remove and reseat that cartridge, also try cleaning the cartridge contacts as shown here.

Regards,
Bob Headrick, MS MVP Printing/Imaging

hp sells wireless adapter interfaces for its printer. Check out their site and what they have to offer.

anaanymous