Question about Computers & Internet

1 Answer

Monior i have a dell 8100 and i unplugged my montor and when i plug it back in its not working it stays black and says a message like activate through pc on the screen it says its in power save mode but its not broken it was just working some time when i have thi problem on my other computer i just click theback switch on th computer and i guess thats like a hard reset but non of this works on my other pc

Posted by on

  • 9 more comments 
  • matty71 Nov 18, 2007

    i turn my computer on & the monitor green power light comes on with a (power save mode) notice comes on the screen for about 3 seconds & the green light turns amber & the screen goes black & thats it. How do i change this setting when i can not see any thing?

  • Kamma_2 Mar 29, 2008

    Some times the screen goes in a power saving mode and goes black. The screen have a message for a 2 sec thats says; Power saving mode.



    When i am playing on the internet, i drop out of the game but just when i play multiplayer but when i play singel player, i can hear the game continue behind the black screen. The music continue's in the back allso.



    Is it a setup someplace that i can switch this off?

  • sage0098 Sep 24, 2008

    power go's on then the sceen flashes power save mode then go;s blank. I can;t see anything to fix it. The power button is green then turns amber.

  • curlinthomas Oct 19, 2008

    When i turned on my computer the monitor say entering power saver mode and then goes blank. When i press a button on the monitor a message comes on and it say press power button on cpu or move the mouse or press any key on the key board to disable. i tried all but nothing happen still lock in power saver mode.

  • susan5915 Oct 23, 2008

    My screen is black and says Power saving mode...What do I do? Help!!!!!

  • ilena481 Nov 08, 2008

    When I turn on my computer the monitor say entering power saver mode and then goes blank. When I press a button on the monitor a message comes on and it say press power button on cpu or move the mouse or press any key on the key board to disable. I tried all but nothing happen still lock in power saver mode

  • Anonymous Nov 25, 2008

    I try to to boot up my computer and the screen says power save mode then it goes blank what do I do

  • Anonymous Dec 02, 2008

    When I turn on my computer the monitor say entering power saver mode and then goes blank. When I press a button on the monitor a message comes on and it say press power button on cpu or move the mouse or press any key on the key board to disable. I tried all but nothing happen still lock in power saver mode

  • Anonymous Feb 14, 2009

    cannot get out of power save mode



  • sweety49 Mar 09, 2009

    my dell monitor...is in powersafe mode and cant ge it out. i plugged it into my laptop and one time only it worked ...now its in permenat powersave mode..wheather in my big system or in my laptop. my laptop saids its working properl but obvioulsy its not.

  • Anonymous Apr 07, 2009

    after some minutes computer enters power saaving mode and its blank till i reset computer

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • Expert
  • 556 Answers

It sounds me that either you have something wrong in making connection or some thing is loose in your monitor. it does not seem to be a major problem, call tech person to do it.

Posted on Oct 02, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell v305 printer allignment problem


Hello Michelle,

You are using Dell Series 9 ink cartridges, correct?

If you unplug the printer from the wall and remove the power brick for 60 seconds, this will reset any error messages the printer has. I would then plug everything back in.

Power on the printer.

Open the printer(with the power on) and take out the Dell Series 9 black cartridge and then reseat it. I would then take out the color Dell Series 9 ink cartridge and reseat it. Now close the printer and it will print an alignment page.

Any error messages?

black cartridge = black side(left side) color cartridge = color side(right side)
photo cartridge = black side(left side) color cartridge = color side(right side)

It's possible to get a Dell Series 9 ink cartridge with a bad sensor. I would take these back to the place of purchase for a replacement.

Bhautesh,

Jan 30, 2014 | Dell Computers & Internet

1 Answer

I have attempted to refill the Series 21 black cartridge for a Dell V313 printer but the message that comes up says the cartridge is missing. Any suggestions Thanks Mike


Hello annmike,
I generally stay away from refill kits for quality reasons, that said there are a few things you can try. 1. remove cartridge, and place back in. (reseating) 2. while cartridge is in place, unplug printer, then plug back in. 3. clean the contacts on carriage with a cloth(minimal amount of lint) 4. clean the copper colored strip on the cartridge it self with a small amount of water on a cloth

Aug 14, 2011 | Dell Inkjet 720 Printer

1 Answer

Black cartridge is new. registers low ink level and does not print at all.


Unplug the printer from the wall. Noe remove the power brick from the printer for 60 seconds. This will reset any error message the printer is getting. Plug the printer back in.

Turn on the printer. Open up the printer and take out the black cartridge and reseat it. Do the same for the color cartridge. Now close the printer and it will print an alignment page. Any error messages?

If you still get the error message, then it's possible that the sensor in the Dell Series 5 ink cartridge is bad. If this is a new Dell Series 5 ink cartridge, then take it back to the place of purchase for a replacement or refund.

black = black side(left) color = color side(right)

photo cartridge = black side(left color = color side(right)

Dell Series 5 ink cartridges have a sensor in them that cannot be reset. Article on refilling Dell ink cartridges.

Dell Series 5 ink cartridges can be purchased at Staples, Walmart or Dell's Website.

It's possible to purchase a Dell Series 5 ink cartridge with a bad sensor. Please take it back to the place of purchase for a replacement.



Rick

Mar 17, 2011 | Dell 962 Photo All-In-One InkJet Printer

1 Answer

I am getting the following error message: Black/photo cartridge missing


Unplug the printer from the wall. Now remove the power brick from the back of the printer for 60 seconds. Plug everything back in. This will reset any error messages the printer has.

Power on the printer. Open the printer and take out the Dell Series 5 Black cartridge. make sure all the tape is off the cartridge and put the cartridge back in. Now do the same for the Dell Series 5 color cartridge.

Close the printer. It should print an alignment page. Any error messages?

Black cartridge = black side(left side) color cartridge = color side(right side)

Photo cartridge = black side(left side) color cartridge = color side(right side)

Dell Series 5 ink cartridges have a sensor in them that cannot be reset. Article on refilling Dell ink cartridges.

Dell Series 5 ink cartridges can be purchased at Staples, Walmart or Dell's Website.

If these ink cartridges are new, then take them to the place of purchase for a refund or replacements. If they're old, then try purchasing a new Dell Series 5 ink cartridge.


Rick

Mar 06, 2011 | Dell 924 All-in-One InkJet Printer

1 Answer

I intalled new ink on my computer and it says to remove tape from cartridge when I all ready did and it will not work


Unplug the printer from the wall. Noe remove the power brick from the printer for 60 seconds. This will reset any error message the printer is getting. Plug the printer back in.

Turn on the printer. Open up the printer and take out the black cartridge and reseat it. Do the same for the color cartridge. Now close the printer and it will print an alignment page. Any error messages?

If you still get the error message, then it's possible that the sensor in the Dell Series 5 ink cartridge is bad. If this is a new Dell Series 5 ink cartridge, then take it back to the place of purchase for a replacement or refund.

black = black side(left) color = color side(right)

photo cartridge = black side(left color = color side(right)

Dell Series 5 ink cartridges have a sensor in them that cannot be reset. Article on refilling Dell ink cartridges.

Dell Series 5 ink cartridges can be purchased at Staples, Walmart or Dell's Website.

It's possible to purchase a Dell Series 5 ink cartridge with a bad sensor. Please take it back to the place of purchase for a replacement.



Rick

Jan 10, 2011 | Dell 962 Photo All-In-One InkJet Printer

1 Answer

Scanner not working, but printer does print


Can you copy a document, when you put it under the glass? B&W and color?

If so, then it is a driver issue. Try reinstalling the printer by following the instructions located at...

962 All-In-One Inkjet Printer owners thread (W7)

If not, then...

Unplug the printer from the wall. Noe remove the power brick from the printer for 60 seconds. This will reset any error message the printer is getting. Plug the printer back in.

Turn on the printer. Open up the printer and take out the black cartridge and reseat it. Do the same for the color cartridge. Now close the printer and it will print an alignment page. Any error messages?

If you still get the error message, then it's possible that the sensor in the Dell Series 5 ink cartridge is bad. If this is a new Dell Series 5 ink cartridge, then take it back to the place of purchase for a replacement or refund.

black = black side(left) color = color side(right)

photo cartridge = black side(left color = color side(right)

Dell Series 5 ink cartridges have a sensor in them that cannot be reset. Article on refilling Dell ink cartridges.

Dell Series 5 ink cartridges can be purchased at Staples, Walmart or Dell's Website.

It's possible to pirchase a Dell Series 5 ink cartridge with a bad sensor. Please take it back to the place of purchase for a replacement.



Rick

Jun 01, 2010 | Dell 962 All-In-One InkJet Printer

1 Answer

Dell E153FPf TFT LCD Panel problem cannot display


The max resolution for this monior is 1024 x 768 @60Hz. You will get the error message if the video resolution is too high to display.

Apr 09, 2010 | Dell E153FPf 15" TFT LCD Flat Panel...

1 Answer

When we turn on our dell desktop,the fan goes into overdrive,it start and continues with one long beep.The monitor stays black and says auto anolouge input entering power save and stays black.We have...


Try another monitor first, if that causes the same error message, suspect Graphics card problem, try replacement graphics card. One long beep points also to Ram issues

Feb 09, 2010 | Dell Inspiron 531S (DDCWGA1_5) PC Desktop

1 Answer

I HAVE TO TURN THE MONTOR OFF AND ON MULTIPLE


Hi,


Unplug the screen, the power cable from it, and leave it 24hrs. Then plug it in and start your computer. Somehow it drains it fully of power and stops the standby situation.

Hope this helps, if anyone can help me then please do.

Thanks,

Dec 08, 2009 | Dell Dimension 2400 PC Desktop

1 Answer

Dell Insprion 8100 won't boot after bios flash


open your computer plate then refix RAM and clean dust from all circuit.also reattch all cables connectors.then put your cmos cell for 15 minutes thenrefix it.ten it resets to factory defaults.then save all settigns.then restrt the computer and then check your harddisk is propely detected or not.

Feb 09, 2009 | Dell Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...