Filled all ink tanks and did all manintenance, deep cleaning , alignment , nozzle check, bottom plate check, but when I print a document some lines are clear and others you can't hardly see or read.
-   The printer suddenly started to print badly, only half of the lines and not clear. I have done all the maintenance, filled the ink tanks and the printer did not change. It happens on all color and black included.-   PortCaptain
Nov 28, 2008
-   black ink just does not print. ive followed all cleaning solutions. help-   Guest
Nov 13, 2007
-   the waste ink absorber is full so that i was not able to print any document...i dont know how to replace it or how to clean...can you please give me some idea..-   ghil
Print quality very poor, the ink cartridges are full but the printing is all faded and almost like...
(More)
Print quality very poor, the ink cartridges are full but the printing is all faded and almost like there is something wrong with ink pads ?
de printermodus geeft deze fout aan en vraagt gebruik van handleiding. ik heb deze momenteel niet...
(More)
de printermodus geeft deze fout aan en vraagt gebruik van handleiding. ik heb deze momenteel niet meer in het bezit Dank Cecilia
My printer will print from safari so it's not like it is entirely broken but documents from...
(More)
My printer will print from safari so it's not like it is entirely broken but documents from microsoft word and textedit won't print. I use a MacBook.
Hi I have a canon IP4000 that is about 4 years old and gets a lot of use. Just recently, I seem to...
(More)
Hi I have a canon IP4000 that is about 4 years old and gets a lot of use. Just recently, I seem to be getting many problems with the black ink tank, which when it is down to about 50% full starts missing horizontal lines down the page. i have tried deep cleaning several times but this only clears the problem for 2-3 pages of print. If you remove the cartridge and shake, vigorously until some ink flies all over the room it then starts to work again but he problem comes back when the ink tank is 25% full and I end up having to replace the ink tank again. I only use canon 3e inks, is there a problem with these inks or does my print head need replacing?