Question about One For All URC-3021 Remote Control
Cannot find code for direct tv remote to work on toshiba tv.
Someone esle found this.. and it worked for me
Program AV1 with 20695, program TV with 10765, then switch to AV1, press select/mute, enter 933, and press select
This will allow volume and mute controls while in DTV mode and allow power on and off while in TV mode. This worked for me on the RC32 remote control.
Posted on Aug 28, 2009
I have a older model toshiba tv and direct tv I nee the code
for the remote I have tried everything
Posted on Jan 29, 2013
I have Toshiba 65h80 t.v. Need the code to program my direct t.v.??
Posted on Nov 03, 2010
Yry 0154 , 0156 ,0060
Posted on Nov 20, 2007
You can find the remote control codes for different brands
of devices from
If none of the codes work then we have two other solutions:
1. Searching For Your Code
If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
2. Learn the buttons from the original
Line up your original remote and the head-to-head before completing the following steps.
Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned
More help for programming your remote can be found here:
Hope that helps!
If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.
P.S. - You can rate a solution with one of four ratings as explained under (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).
Posted on May 05, 2008
only one i found but they all seem to work the same.
Posted on Oct 24, 2009
Testimonial: "Thanks!!! I received a response within a matter of minutes and resolved the problem. "
Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.
if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)
Posted on Dec 30, 2007
Tips for a great answer:
Oct 09, 2012 | Remote Controls
Jun 07, 2010 | RCA RCR311B Remote Control
May 17, 2010 | Universal Remote Control DIRECTV Universal...
Oct 24, 2009 | Philips Remote Controls
Sep 13, 2009 | Remote Controls
Dec 06, 2008 | Directv RC23 Remote Control
Jul 24, 2008 | One For All URC-3021 Remote Control
May 21, 2008 | Remote Controls
13,421 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: