Question about BenQ PB6100 Multimedia Projector

1 Answer

LCD shutting off automatically

I use a Benq LCD projector to give powerpoint presentations. Lately the projector shuts down shortly after powering up. Just before it shuts down the Power and temperature indicator lights flash in red and the lamp light flashes in yellow. Clearly the problem is temparature related but the fan is running. What do I do?

Posted by on

  • Anonymous Dec 10, 2007

    Can not access menu to reset lamp hours. I do know that you need a signal to the VGA input for the projector to find before it will allow access to the menu. It shuts down with the new lamp before I can do anything with it.

  • Anonymous Mar 23, 2014

    Video projector MS517 is not starting and the lamp light is red.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

Hi,

The problem comes in the Lamp unit generally. check the condition of Lamp.

Viren

Posted on Nov 19, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power automatic shut off after 5 seconds


check the lamp first
We supply original projector lamp,bulb,parts,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price.
any questions, feel free to contact me
have a nice day!
Jerry,Lampdeng Limited

Jan 29, 2014 | BenQ Office Equipment & Supplies

2 Answers

My benq MP 512 shuts down after a few minutes of use. when it shuts down all 3 light indicators are off, fan also goes off.


DONT WORRY THIS IS A REGULAR PROBLAM OF BENQ ,DELL,INFOCUS PROJECTORS UR MAIN POWER SENDER IC IS DAMEGED THROUGH UR PROJECTOR AND BUY EPSON,HITACHI,SANYO PROJECTORS

Mar 12, 2012 | BenQ MP512 SVGA 2200 ANSI 25001 22KG...

2 Answers

Projector shuts down ca 20 sec from start.


sounds like you may have the wrong bulb and it is being overpowered.

Dec 15, 2009 | BenQ PE8720 DLP Projector

1 Answer

My benq projector turns on for a few minutes (light and fan going strong), then it shuts down.


if it goes through shut down mode (lamp first and fans run a while), reset the settings to factory default. while you're in the menu, check the lamp hours (under settings). if they're close to 2000 hours, replace the lamp. if the projector shuts down immediately, fans and all, you have a power supply problem. you'll need to replace it.

Nov 30, 2009 | BenQ Office Equipment & Supplies

1 Answer

Screen resolution on powerpoint cannot be locked at high res. Changes when connected to my projector. Monitor screen res. also changes everytime the projector is plugged in, In power point display (2nd...


I just checked the specs on your Benq PB 6110, which has a native resolution of 800X600 and will simulate 1280X1024. When you connect it to your computer, the computer goes to 800X600, right? That is the resolution of the BenQ. How high a resolution do you want? THe highest I have seen in projectors is 1024X760, which is not that much higher. Projectors seem to lag behind monitors and Plasma/LCD/LED TVs for resolution. They must have a very small market share therefore low developement.

May 07, 2009 | Microsoft Office PowerPoint Home and...

2 Answers

Benq PB8220 lamp used for 375 hrs shuts projector automatically


Hi Ash, check your manual as by memory you can do this by a 2-3 button reset via the remote control. Regards Kevin Andreassend. http://www.iceav.co.nz iceavtech@gmail.com +64-9-4142348

Jan 05, 2009 | BenQ PB8220 DLP projector 2200 ANSI lumens...

1 Answer

PB6110 Powers down after 30s, splash screen appears, red temp lig


Be sure to check the filters and make sure you have good airflow thru the proj. Cleaning filters solved our temp shutdown problem.

Nov 17, 2008 | BenQ PB6110 Multimedia Projector

1 Answer

Benq mp610


I replaced my lamp on my Projector MP510 after the projector shut down. I followed the instructions in the book to reset the projector but the projector shuts down all the time. Please can you help me HARRY

Sep 14, 2008 | BenQ MP610 Multimedia Projector

2 Answers

LCD shutting off automatically


Hi there

Check if your blowerfan that cools the lamp - sits in front of Projector is running.

Nov 06, 2007 | BenQ PB2140 Multimedia Projector

Not finding what you are looking for?
BenQ PB6100 Multimedia Projector Logo

1,154 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2237 Answers

Tom Chichester

Level 3 Expert

46128 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a BenQ Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...