Cannot reset password for parental control - RCA F27440 27" TV

enter 7444 in the parental controlls password box to reset the password and controll levels

It's set because your parents don't want you watching stuff you don't need or playing games all night.

Hi Jessica

There are two methods to reset the Parental Control on a PlayStation 2, the Quick Method and the Easy Method.
The Quick Method to Reset Parental Control

• Power on the PS2
• Press the Reset button
• Inset an R-rated and wait until the board comes up telling you that Parental Control is on
• Hit the Select button
• At the enter password prompt, hit the Select button
• At the Delete password prompt, enter in your password
• Hit the X button

If you do not know the Parental Control password on your Ps2, try the known defaults of 1111 and 7444.
The Easy Method to Reset Parental Control

• Unplug the PS2
• Wait approximately 72 hours

Hope this helps :)

I can help you unlock your Mitsubishi HDTV V-Chip parental lock.

Please follow these steps to bypass the vchip or reset the V Chip password.

I hope that helps.
_______________________________________________
Reset Mitsubishi HDTV VChip Password
Bypass Mitsubishi HDTV Front Panel Lock

lost old password to parental control. How to reset?"

i have an insignia hdtv and the manual says if you forgot the password, enter in 3448 in the password box to reset, it might be the same for yours, good luck

try 3308 if not read the instruction manual or telephone them for support

I have forgotten the password for my parental control/content adviser window. Can you help me either remove it or change it without knowing the existing password. Thank you!!

Here is the procedure to reset the parental lock code:

1. From the XBOX dashboard screen, go to settings and then parental control.
   
   
2. When prompted for the password, perform the following sequence using the XBOX controller: X, Y, Left Trigger, X.
   
   
3. Enter in a new password, or disable parental control entirely.
   

fixya!

Disconnect power to the TV. The power interruption will allow you to reset the parental control password to the default password of 0000.

To change the password after disconnecting the power, do the following:

1. Press the Menu button on the remote.
2. Arrow up / down to SET LOCK CODE
The lock icom will appear
3. Arrow left / right to operate
4. Press 0 to access the lock code
5. The first digit will be highlighted.
Arrow left / right to select the number
Arrow up / down to move to the next digit
4. Continue to follow these directions for all 4 code numbers.
5. Arrow up / down to FINISH
6. Arrow left / right to save settings and exit.

The password has now been reset.