Question about HP PSC 2175 All-In-One InkJet Printer

1 Answer

Warming up my copier keeps giving me a "warming up" message and doesn't go beyond that point. I can't print from the computer either. I get the same message.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Contributor
  • 21 Answers

Hi, The warming Up messge usually occures when the scanner bulb is not getting heat up for the correct temprature or the scanne bulb might be defective.. To resolve this issue follow the below instructions.. First connect the printr directly to a wall outlet as some times surge protectors will not provide the required power for the printer then this message can come up. Once the printer is directly connected to the wall outlet try to turn on the printer and check with the issue.. If the issue presists try the instructions in the below webpage.. This shoule resolve the issue .. Wish u success.. Regards. Barret.

Posted on Oct 02, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Unable to finish initializing

I'd suggest you get it for a refurd, thats either a faulty wire or faulty motherboard, had such issue at the end it turned out the power was too low, so check your AC too or house/workplace power.

Jul 25, 2013 | Zebra P430i - Color Dye Sublimation /...

1 Answer

When I turn on my Canon ir 1018 it doesn't stop heating. i.e it doesn't get ready for photocopying. It keeps on turning but doesn't stop in order to get ready.

This sounds like a faulty fuser assy. Basically the machine is warming up but nevers gets to temperature. The lamp has probably blown and for some reason it is not giving any error.

I would put a new fuser in and all should be well.

Jul 19, 2011 | Canon IR1018J Black and White Copier

1 Answer

My printer won't print. my computer is hooked up to it, and it doesn't give any error messages. it just doesn't do anything.

Go to Control Panel/Printers. Right click on your printer's name, and hit Print Test Page. If printer prints a page out, then the problem is likely with the software you're using to print - make sure you have selected the right printer in the dropdown. If the printer's name doesn't show in the Printers folder of Control Panel, the driver for it has not been installed. Do so and try again.

Jun 18, 2011 | Lexmark X2670 All-In-One Printer

2 Answers

My printer wont connect to my computer

please be specific with your problem, you could give details like:
>do you have an icon for your printer on your computer?
>does your computer give you any error message whenever you attempt to print?

Oct 23, 2008 | Office Equipment & Supplies

1 Answer

Printing pictures on Kodak Printer dock G610 from Kodak Easy Share on the computer

keeps giving me message "printing error" (prints ok from camera) i have probably messed up every setting by now

Oct 20, 2008 | Kodak EASYSHARE G610 Thermal Printer

2 Answers

Printerr taking time to warm up and now show new hardware found any help

Please review the link provided and follow the steps suggested to solve this known issue: You may also want to review this link as it contains instructions to update the firmware which resolve your "warming up" error message. Please let me know if either of these references fixes your issue. If they don't I would be happy to continue assisting you. Thanks...

Jul 26, 2007 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Panasonic DP150 FX Workio information screen is saying "Warming Up"

remove the paper drawer and check at the back of the mc where the cassette was for paper

Mar 21, 2007 | Panasonic Workio DP-150PA Copier

Not finding what you are looking for?
HP PSC 2175 All-In-One InkJet Printer Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

Ben Johnson

Level 3 Expert

685 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides