Question about Yamaha YHT-280 System

1 Answer

Remote Control How do I program my remote control to read my television so I only have to use one remote control for my television and my receiver?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 93 Answers
Re: Remote Control

If you have a programmable remote control unit, see if you have "auto search" mode. See what your manual (if you have one) says about it.

Posted on Oct 03, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do you program it to a GE universal remote

these are the codes
LG: 004 005 009 012 050 057 080 156 227 338

  • How to Program a GE Universal Remote ' Techwalla Lost your Remote? Need help programming your GE Universal Remote? Most TV's, VCR's, DVD Player's, Cable and Satellite Boxes will work with a GE universal...
  • How to Program GE Universal Remote: Quick Steps > Electronics > Home Theater > Home Media 2011-04-18 · How to Program GE Universal Remote Using the Code Search Function. If you've tried the codes listed for your device brand and are unable to get your ...
  • GE Universal Remote Codes and Instructions ' direcTutor Goto GE remote Codes. Direct Code Entry for GE remotes with 4 digit codes. 1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to program.
  • How to Program a GE TV Remote ' Techwalla GE universal remote controls allow users to program multiple devices onto a single remote. The remote control uses codes to detect the device, and you can...
  • GE Universal Remote Quick Start Guide - YouTube Youtube
    • 3 MIN
    2013-04-18 · Video embedded · Eliminate remote clutter with GE Universal Remotes
  • How to Program a GE Universal Remote Control ' eHow > Tech > TVs > Remote Controls
    Programming a Jasco/GE Universal Remote Control takes about seven steps. As with programming other remotes, you need to know the code of the component you are ...

  • May 09, 2016 | LG "32"" inch New 2011 HD LCD TV With HD...


    Onkyo Remote Control Programming Would you like help programming your Onkyo...

    Onkyo Remote Control Programming



    Would you like help programming your Onkyo remote control to control other devices?

    To program your Onkyo remote control, follow these steps:

    1. Hold down the REMOTE MODE button for which you would like to enter a code, and keep pressing it down.
    2. Press and hold down the DISPLAY button until the remote indicator lights up (about 3 seconds).
    3. Within 30 seconds, use the number buttons to enter the 5-digit remote control code for your device. (look these Onkyo remote control codes up in the codes list.)
    4. The remote indicator will flash twice to indicate a successful programming.

    The Onkyo remote control codes, listed by brand, are available here.

    I hope that helps.

    on Apr 11, 2010 | Home Theater Systems

    1 Answer

    Unable to control volume to the receiver with my universal remote

    There has to be another code for this then. Remotes have a way of manually programming them by going through all available codes known and not just the listed code that is supposed to work. I would follow the instructions for that method to find the proper code.

    Nov 11, 2012 | RCA RT2350 System

    1 Answer

    How do I code my Yamaha rx-v361 receiver onto my comcast remote control?

    To program your remote follow these steps.
    1-Turn on the receiver
    2-press the "AUX" device key on the remote control
    3-Press and hold the "setup" button until the aux key blinks twice, than release the setup button.
    4-Enter one of the following codes
    30176 or 31176
    5-If you entered the code correctly, the AUX key will blink twice and turn off. Now aim the remote at the receiver and press power. If the device turns off, than the code functioned properly. If the receiver does not respond, restart the procedure and enter the other code provided
    Good Luck

    Jan 05, 2011 | Yamaha Home Theater Systems

    1 Answer

    I can't control the HT-C6530 unit with the remote. The remote is controlling the TV instead of the samsung HTS and i can't seem to switch it back. Seems to be something to do with the BDReceiver/TV button...

    press bd receiver / tv button to select the remote for any one. u can use the same remote for tv and blue ray receiver. when u want to control blue ray with the remote, select remote for the same by pressing bd receiver / tv button and wise versa.

    Dec 27, 2010 | Samsung HT-C650W Theater System

    2 Answers

    We just got a new Dish HD/DVR Receiver and need the remote code for the Bose remote control to operate it.

    Here is what I did for my Bose Solo Tv to work on the Bell 9242 receiver.( see page 17 of Bell 9242 guide) 1. Hold down the aux button until all lights flash. 2. Press 2 to ensure Aux is set to audio. 3.Enter code 761 and press the pound (#) button. Now to have the satellite remote default volume to Bose Solo do the following. 1.Press and hold AUX # pound 3. Press the + side of volume 4. Press 0 5. Press pound ( AUX button will flash 3 times) 6. Press SAT mode 7. Test the volume on Bose Solo. (see page 22 of Bell 9242 guide)

    Jul 05, 2010 | Bose 3 2 1 GSX System

    1 Answer

    Program remote for sony ht-5100-d

    Use your Directv remote. Use code 10812, remember to program it to change tv inputs also. then program the same remote to control volume on your Sony receiver. Go to the menu on the directv box and follow the onscreen instructions.

    Apr 24, 2009 | Sony HT-5100D System

    1 Answer

    Can't find the code to program RCA RTD207 dvd home theater system

    try these codes:
    • 178
    • 184
    • 205
    • 218
    • 224
    • 228
    here is another way to program the remote:
    1. turn the device you want to set
    2. aim the reomte control at the device and press and hold down the code search button for at least 3 seconds until the red led lights up solid red
    3. press the device button you wish to program tv, vcr, dvd,etc and the led light will blink once and then remain solid red
    4. press on/off slowly and repeatly until the device your trying to program shut off
    5. once this occurs press enter button to store the code and the led light eill turn off

    Jan 08, 2009 | RCA RTD207 System

    1 Answer

    I NEED REMOTE CODES FOR THIS DVD RCA DRC200N I have an RCA dvd player (model RTD207) that I cannot program using the SPECTRA (model RC-500) Jumbo remote control I received as a Christmas present. I read...

    I got it under control with a Time Warner remote the code is 10-1-9 or 1 area code and 0-1-9. So just put the remote in auto and cycle thru by pushing the channel buttom on teh TW remote, check yur remote.

    Jan 08, 2009 | RCA RTD207 System

    2 Answers

    Need remote control code forphilips hts8100 to program univ-remot

    I have a brand new one!!! I can list it on ebay very cheap. You can e-mail me at

    Nov 22, 2008 | Philips SoundBar DVD Home Theater with...

    Not finding what you are looking for?
    Yamaha YHT-280 System Logo

    Related Topics:

    85 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Yamaha Home Theater Systems Experts

    Matthew Spark
    Matthew Spark

    Level 3 Expert

    1042 Answers


    Level 3 Expert

    3283 Answers


    Level 2 Expert

    232 Answers

    Are you a Yamaha Home Theater System Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides