Question about Tricity Bendix AW1000W Front Load Washer

1 Answer

Problem with the machine.

I set the wash programethen press the start button and nothing happens. There is nothing wrong with the water inlet or the electric.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 209 Answers
Re: problem with the machine.

Once you have checked the door is shut properly, then i would start with the door interlock, DO NOT test by bypassing this can cause serious damage to the timer, replace if needed and work with safety unplug from power supply before removing any item taking note in detail of any wires etc

Posted on Oct 02, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer


water should pour in . check the hose inlet for crud in line ,it has a screen , check water is on,
finally check the water solenoid does it clack , does it have power ,for that you might need help

Oct 11, 2014 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Failing to Load Water

How old is it ???

Jun 16, 2013 | Washing Machines

2 Answers

LG WD-80154TP washing machine is showing OE, which means the plug or filter is clogged. I cleaned both and am still getting the same message. What do I do now?

have you done a reset turn off machine by the mains leave off for 10 min's make sure door is open at all times make sure machine on/off button is off and the programmer is set to the off if you havent got a off on the programmar put it on a spin program ok then switch the mains back on turn on the machine on off button then press start then shut the door that is a reset if you still have problems get back to me ok

Nov 07, 2012 | Washing Machines

1 Answer

My WMS38 Hotpoint washing machine has the wash, rinse and spin and final spin lights on but nothing happens when the start button is pressed

Assuming tap water is turned on. If there is no water intake, the machine will not start. Check for the sound of water pouring in the machine. Check the water inlet filter, if it is jammed with foreign materials such as rust deposits, small stones, soil etc. Then check for the proper functioning of inlet water solenoid valve. Sometimes the valve gets stuck.

Nov 25, 2011 | Hotpoint Washing Machines

2 Answers

I select a programme and then press the start button, the door locks but the start light flashes, and nothing happens

When the program is pressed to start then the inlet valve must open and allow the water to come to the drum. if this is not happening then check the voltage to the inlet valve, if there is no voltage then the program controller is not outputting and so defective.
If not the inlet filter/valve is clogged and will need a back flush .

Apr 11, 2011 | Washing Machines

2 Answers

The water stopped coming into the machine?


If your washing machine will not fill, only hot or cold will fill or is slow tofill then read these tips. I have covered many of the things that can happen inthese tips...

Washing Machine Problems No Water

Washing Machine Fix Washing Machine No Water


Jan 06, 2011 | Kenmore 24032\24036 Top Load Washer

1 Answer

Hey, my f&p smart drive 9 excellence washing machine does not start wash cycle after entering water level etc.... upon pressing the start button nothing is happening any thoughts?

Is the bowl turning slowly when you press start.if it does then you may have a faulty inlet valve,make sure taps are turned on.try advancing the machine to spin cycle,see if it will do any other things such as spin & drain.if it does then probably just not letting in water & inlet valve needs replacing..try filling machine by hand & see if it washes.

May 24, 2010 | Fisher and Paykel (IWL12)

1 Answer

Power is on, still will not start

Too many clothes
washer door not opened between washes
low power/extention cord
kinked hose
Door not shut tightly
hoses connected backwards
inlet screens clogged
circuit breaker tripped
unbalanced load
excessive suds
wrong detergent
Repair Manual

Jan 14, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Zanussi aquacycle 1000 start pause button

investigate the water inlet cold water inlet valve

Feb 28, 2009 | Washing Machines

Not finding what you are looking for?
Tricity Bendix AW1000W Front Load Washer Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tricity Bendix Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Tricity Bendix Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides