Impressa e9 won't turn on,around two years old, just one day no power!

You need a new drainage valve on the base of the brew unit.

Hi, a video how to fix your Jura step by step, good luck... http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Use a pin or a needle on the spout to clean the nozzle head. Most of the time this is due to useing to fine a grind in the machine. You may have to clean the head this way more then one time to get it to start working again properly.If you have any further questions message me back.
Thank you
Rick

You can find the Jura manuals here:
http://www.capresso.com/customer-care-instruction-booklets.shtml

check silicone hous from water tank to pump,and check hous from pump to brew unit.i had same problem with white hous from tank to flow metar

You can find some detail procedure in this tip below
http://www.fixya.com/support/r5713182-jura_capresso_impressa_f9_malfunction_8
Try it since it have help some other with same problem.

Everytime the mainswitch is turned off you must set the time, there`s no backup battery on the machine, so the time is lost everytime you power down. If you set the time you can program on/off time. To avoid this every day, just use the standbymode.

Disassembly of the grinder is most likely due. There are springs and ball bearings in there so be careful not to lose any parts. I learned that the hard way. I can send a pictorial, written in German, but helpful. e-mail me at [email protected].
Mike

Simple fix - got the machine serviced, needed a new thermoblock apparently, could also have been one of the couple of sensors they replaced. Total cost including box, bits and carriage - £180 plus change.
Expensive but now I have it back, it all seems worth it!

Your spout is probly cracked (a common problem). It won't hurt the machine if you want to live with making one cup at a time to catch it all.
If you want to get it repaired go to www.hotncold.com Click on Jura Repair for shipping instructions. We can turn the job around in 24 hours. The repair will also include a free software update.