Tv repair of Samsung standard tv

How To Program Your Samsung Universal Remote

support-us.samsung.com/.../pop_troubleshooting_fr...

Samsung ElectronicsFeb 5, 2013 - You can program your Samsung television universal remote control to... Note: Your remote may have separate buttons labeled Cable, DVD, ...

How to Program DIRECTV Remote Control ' DIRECTV ...

https://support.directv.com/.../how-to-program-directv-remote-c...

DirecTVHow do I program my DIRECTV remote control? Print. Email ... DIRECTV RemoteSetup to Change the TV Input Source. If you can ... Still need help? Contact us ...

HOW TO RESET YOUR TV REMOTE CONTROL - YouTube

? 3:15
https://www.youtube.com/watch?v=CnFfo8-3GC4
Feb 11, 2012 - Uploaded by SlimfromMrRemote
However, if this does not work and you do need a new TV remote,... thank you so much my control samsung tv AA59-00580A its working again ...

HOW TO PROGRAM SAMSUNG SMART REMOTE - YouTube

? 8:35
https://www.youtube.com/watch?v=asgS7NzQLi4
Jun 28, 2012 - Uploaded by Tampatec

Sorry but bad news is that your remote is defective and you can't get it working just by pushing buttons and bumping it agains your table. Take it to repair or get a new one.

It needs to be Re-Paired to the TV.

First, fresh batteries, and clean battery contacts if needed.

Then, Try Pairing procedure:

1. TV off
2. Bring remote within 3 feet of TV
3. Push Pairing button (Paper Clip or other pointed object in button hole)
4. Turn on TV
5. Should be paired. Try remote channel or other buttons.
6. If not, try 2 more times.
7. If still not working, push RESET button first and repeat Pairing.

Samsung remotes for LED / LCD TVs are generally RF, not IR.
Most Universal remotes do not generate RF signals, so disregard advice about codes for Universals.

1. TV off

Within 3 feet of TV



PAIRING and RESET buttons:




Please rate if Helpful.

Good Luck !!

Check its front panel switches for damage. If any one among them has got strucked, this type of fault can occur.

After tune in any chanel.Check ur tv remote display button on the remote control.Any tv channels play in 1080i modes are in HD channels.

press tv first then it should work and put freash batts in the remote

You have to have a remote control to set the chanel to 00. You cannot do this with the chanel buttons on the front of the tv.

I turned the TV off. I held in all of the (4) buttons on the front of the TV and turned the TV back on again....this seemed to free up the remote control access and I was able to work the TV normally. The four buttons were the channel and the volume controls.

check the power supply and HOT if good ,re solder your tv maybe there's a lose connection

Probably, at first you searched the programs in automatic way. And there were only 20 channels at that time. So, you only have 20 channels. You should try to search channel 21, 22, 23, etc, manually. If you can't set 21 on your program, then your tv set has only 20 programs.