Fujitsu ah 532 keyboard driver - Fujitsu LifeBook AH532 Notebook

you don't 'start' it. it's automatic if it's installed. if you installed it after starting the fujitsu, restart it.

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

Guide for future;

1) Fujitsu Support >

http://www.fujitsu.com/us/support/

Under the bold sub-heading - Product support for:
,left-click on - Notebooks and Tablet PCs - in the list.

2) Down under the bold sub-heading - Product Information -
,left-click on - Downloads - in blue.

3) At the top left under - Select Product -
,left-click on - Notebook

4) At the top middle under - Select Series -
,scroll the sidebar down, click on - E Series

5) At the top right under - Select Model -
,scroll the sidebar down, left-click on - 4010D

6) Go to the right, click on Go. (To the right of the white arrow in the red box)

Remember,...you need to download AND install the driver/s.
Need info on how, post back in a Comment.

Regards,
joecoolvette

Best an easiest option is eBay.

http://www.ebay.co.uk/itm/Keyboard-French-Fujitsu-E8110-S7110-CP275819-CP297220-/110559275730?pt=PCA_Mice_Trackballs&hash=item19bdd8aad2

Dear user please reinstall your webcam driver and your problem will be solved ...............try it

Hi,

I had the same problem, even after updating drivers, but I found solution.

1. Go to website:
http://www.pc-ap.fujitsu.com/support/drv_lb_vista_p7230.html
2. Download file: Camera Driver (for model with Fujitsu WebCam module) V.1.0.0.1088b
3. Unzip it
4. Open "fujitsu_webcam" folder
5. Run "Setup" and follow instruction
6. When installation is finished restart computer can be required.
7. Next, go to START, and open WebCam in Camera. Check settings. Now, everything should be OK.

Enjoy :)

Click here to download and install the drivers.

you may try to reinstall the driver soft to see if helps.

http://www.newlaptopkeyboard.com

Remove the square screw covers above the keyboard on either side of the swiveling screen hinge. Unscrew the 2 screws and use a small flat head screw driver to remove the plastic cover above the keyboard. Do this by inserting the screw driver underneath the plastic cover near to the f keys on the keyboard and gently pop the cover off. Carefully remove the ribbon from the motherboard, use a small screw driver to release the clip that holds the ribbon in place (ribbon located above f3,f4 keys). Slide the keyboard up and it should release if it doesn't then there may be some sticky tape holding the keyboard down, this is located behind the f2,f3,f4,f5 keys, carefully pull the keyboard away but hold the keyboard by the f keys so that you do not damage the keyboard by bending it. Reverse the procedure to fit new keyboard

The function key could be damaged or stuck down. If not, try going to Device Manager. Right click on the Keyboard and choose Properties. Click on Update Driver as it might find something. Reboot the computer. If that doesn't work, go to Device Manager, right click on the keyboard, choose Uninstall, and reboot the computer. When it starts up and sees the keyboard and loads a driver(s) for it, it might fix it. Good luck.

TAKE TO THE SERVICE CENTRE SIMPLE