My system has started a buzzing noise only out the rear channels. Almost like a feed back noise. I have unplugged a front channel speaker, they work fine, and plugged it in the rear channel.BUZZZZZZZZZZZZ. i have tried emailing spherex, they dont give a real email address on the company website!! I tried restoring the default settings, ive tried plugging the power into its own outlet, by itself. nothing is working! i am starting to get really mad, can someone please help me.
i have had no problems ubtil now, ny sytem is about a year and a half old.
I had the exact same problem which eventually spread to all speakers i took it to local repair guy, he was able to resolder the power board seem to fix all didn't really cost me much cheaper thean shipping back to spherex or whoever
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Generally the hum is one of two things. If a sensor, pickup, per-amp, or mini-amp are too close to the receiver or speaker, Feed-back may occur or a hum and buzz join the audio signal out. The usual problem is: line in port on the instrument can be defective or the male jack is not making proper contact. If a cord is tested and working, the condition is in the input on the instrument. If a terminal has a loose wire inside the instrument the problem can be intermittent ( come and go) and thus a buzz or line noise may be present.
yes. A good idea. Kill power to the sub, then unplug and remove everything from the sub. go ahead and plug it in again and check for buzzzz.
That is test one. if you have buzz still, its the sub assembly. bad luck, but not impossible. If the buzz is gone its one of the signals to the sub. They can produce a buzzz without any signal coming from your stereo equipment. Replace the feed line, enjoy! BTW...Kef sure does sound clean. good choice.
'Buzzing' is not a good thing; it implies that filtration of the DC used by the output section is not as it should be.
Power supplies that are mildly overloaded can cause this or an abnormal current drain from one (or more) channels.
The odd problem with the back speakers does sound like a setup problem rather than a circuit failure.
Of course it will stop buzzing when you mute the speakers.
From the limited description, it could be anything from a power supply to loose wires in the system between the speaker leads and the motherboard.
Best bet is to take it in to a technician and get a pro's answer. If he wants to charge more than what it's worth to you, get a new one.