My washing machine takes in water when turned off. If not attended to for a week or so will flood out onto the floor. The electrics have been isolated at the wall.
That is a contact to ground , either on inlet valve connector or on wiring harness. If it is not that it can be a bad timer board, but that is really unusual in this case.
I am after a manual copy for a Bendix Duomatic WD 1054 B washing machine. I don't know how to work...
(More)
I am after a manual copy for a Bendix Duomatic WD 1054 B washing machine. I don't know how to work all of the contols in this machine, it is a second hand whitout the instructions. Please help!!!
machine goes through cycle but spends only 1 second on each process. then stops. overall programme...
(More)
machine goes through cycle but spends only 1 second on each process. then stops. overall programme time normal.
The error codes for 1,2 & 4 flashes are given in the operators manual but not 3. The drain...
(More)
The error codes for 1,2 & 4 flashes are given in the operators manual but not 3. The drain pump operates but goes into error when the water has been pumped out.