Question about Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

1 Answer

Maytag 100 series

Dishwasher suddenly began making a loud noise as if something was jammed. Have checked but cannot find anything jamming the arms. Thanks

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 114 Answers

If the unit is just humming and then cuts itself off, you could have a defective motor. However, this same symptom could be caused by something being caught in the pump assembly.

Posted on Oct 01, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why dishwasher started making growling sound all of a sudden?

Possibly something stuck/jammed in the wash or drainpropeller, remove filter mesh at the bottom of the dishwasher. Remove any debris jammed near the propeller caution there may be glassor debris near or where the water drains-out.Removeand clean the spray arms, they may have food debris jammed, rinse in hotrunning waterMaintainerWash Runa wash with a tablespoon of powder, without any dishes on the hottest settinge.g. intensive, 65C, if you have a 70C this will be more effective.Loaddishes and re-check

Apr 09, 2012 | Maytag Dishwashers

1 Answer

My Dell 2135cn printer all the sudden started making crazy loud grinding noises. Then I got a paper jam. I fixed the paper jam and tried to print again, but got the loud grinding noises and paper jam...

Refer to the service manual in disassembling the device.. Clean it thoroughly then try it again.. If, you have no experience in doing so, hire a qualified tech to do so.

Jun 17, 2011 | Dell 2135cn All-In-One Laser Printer

1 Answer

Washer making loud noise and wont spin

Check and see if the inner drum is loose and floppy.if it is, it's likely the bearings have collapsed, and require replacement...If the drum feels stiff and tight, it could be that something is jammed between the inner and outer drums. Both situations could be costly...Get quotes....Good luck...Nomess

May 22, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Loud noise

Check for bones/glass/ceramic from chipped plates in the food chopper (for lack of a better term). You'll need to disassemble the entire lower arm unit.

Sep 06, 2009 | Maytag 24 in. MDB7600A Jetclean® II...

1 Answer

My Bosch SHU43C will sometimes make a loud noise

It may be more cost affective to just replace this unit. the circulation motors that are used in these dishwashers are not reliable. the wash impellers seems to have issues dealing with staying attached to the drive stud and shaft. this will cause the impeller ti shift inside the housing, causing noise and jams.

A new circulating impeller kit will cost about 100 dollars and, labor for this type of repair is 80 dollars an hour.

Jun 21, 2009 | Bosch Dishwashers

1 Answer

Paper feed

Hi there.
First of all pull out the paper jam cover - is behind the printer with a clock-like handle. Pull it out and check for any paper or other objects. If U dont see anything try to manualy rotate the black rubber rollers and check for that noise. Locate it and try to describe what you see.

Jun 28, 2008 | HP PSC 2175 All-In-One InkJet Printer

1 Answer

Loud noise

Very loud squeaking sound, at the start of each cycle.

Jan 09, 2008 | Kenmore 16639 Built-in Dishwasher

4 Answers

Diswasher motor making noise during wash cycle

It could be the impeller on the motor. The impeller fits over the shaft of the motor and might have split/broken up. That funny noise is probably the shaft spinning inside the damage impeller. Fortunately the impeler is fairly inexpensive and easy to replace. I believe there are one or two parts/covers to remove that are held in by a roughly half dozen torx screws.

Jan 04, 2008 | Maytag 24 in. MDB8600AW Jetclean II...

2 Answers

Panasonic workio sp-190 machine says paper jam

This series of machine has frequent issues with the sensors in the paper path to detect timing and position. The sensors are actually optical but the utilize sensor"flags" to interrupt the sesnors light "beam". These sensor flags tend to pop out of position and/or break the springs. I have also seen the actual optical sensor fail.

Dec 24, 2007 | Panasonic Workio DP-2500E Copier

1 Answer

Maytage dishwasher

Hi Fix it mom, If your courageous, pull the trays out of the way and remove the screen in bottom of the dishwasher to see if something is getting into the pump. By something I mean undesired matter. Straw, Twist tie, knife, toothpick, etc... I hope this helps

Sep 25, 2007 | Maytag 24 in. MDB4651A Built-in Dishwasher

Not finding what you are looking for?
Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers


Level 3 Expert

4345 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides