Question about Standard (CRT) Televisions

1 Answer

Goodmans freeview box gd2

Worked faultlessly for years. Mains substation failure in Plymouth.Function lcd now flickers read rather than green when remote used and no screen etc display at all. Pressed reset button on reverse, nothing dead. now two RED constant lcds and no function. Switched off for hours too, any fix? or is it one for the skip?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 372 Answers
Re: Goodmans freeview box gd2

Hi. I have never worked on this box but if it went faulty after power cut chances are that some of the electrolytic capacitors in the psu (power supply) require changing. Look for any that look like they have got hot are bulging or have a dark stain around them.

Posted on Oct 01, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Freeview in Goodmans LD3266D

you must adjust from the Moden with r.control from your supplier cables company, Not from the TV. The tv had capacity for to see any channel.
God bless you

Jul 19, 2013 | Standard (CRT) Televisions

1 Answer

I bought a Toshiba 32 Inch HD Ready Digital LCD TV - 32BV500B yesterday from Argos, Leyland. I tried to set it up and it searched for programmes but did not return and any programmes. It had a blue...

Are you using the freeview tuner, I only ask as it looks like your having a similar problem that I had a few months back. I moved into a new house and plugged in the tv. Using the freeview tuner I wasnt able to get any channels. It turned out although the aerial picked up regular analogue tv it wasnt the correct aerial for freeview.

Aug 17, 2010 | Toshiba Standard (CRT) Televisions

1 Answer

I have a bush colour tv and there is a blue,green,red colour wash right across the picture so people''s faces look half blue,green red....sort of as if there is a rainbow across the screen.. i do not have...

It sounds like your TV may need degausing.
Is your TV situated near to any loudspeakers or other devices with large magnets inside them? Or has anyone been near your TV screen with a magnet???
You need to try to get the screen demagnetised (degaussed). Many TV engineers have a degausing coil that could do this. It only takes around 20 seconds at most.
Some TV's like Mitsubishi have a DG button on the remote, that does this function without the need to call out an engineer! It only needs one press of the button every few years!

Nov 17, 2009 | Standard (CRT) Televisions

1 Answer

We have had our tv for a few years, cant remember exactly, it is a CTVL26W34ID and we need to know if it is digital ready. Thanks for any help you can give.

I cannot find a manual for that number.
If it is digital you would be able to receive more than the 5 analogue programmes.
It would probably mention freeview on some part of the tv.
If you can get some of the extra freeview channels but not clearly then the aerial will need changing.

I presume you are from the uk, I had to change my aerial to get reception the cost for that was £240(i needed a indoor roof aerial so needed extra boosters).so aerial will be £150-£240.
You can turn your tv into a digital by adding a freeview digital box £20-50 .
Or purchase a new tv with freeview incorporated in it.
So i `m pretty sure if you have read the above you can decide whether its digital,but i think not.

Oct 31, 2009 | Standard (CRT) Televisions

1 Answer

How do I retune my Goodmans 1475TS ?

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit

For specific model information visit

Sep 25, 2009 | Goodmans 1475TS 14" TV

1 Answer

What plugs in where at the back of model 32AV633D Does single scart go to ext 1 or ext 2 Where does outside aerial plug in, there are so many ? Sorry but I'm a complete technophobe who is hopeless at...

If you have a cable box or freeview box, your main aerial lead plugs into the box. Then you connect a scart lead from your cable box/freeview box/ or dvr box to ext 1 on the tv. Where the aerial lead plugs into your cable/freeview/dvr box, there may be an aerial out socket too. You could connect a patch lead from the box to your tv as well so you have UHF direcy from your cable/freeview/dvr box to the TV as well as scart

Aug 06, 2009 | Standard (CRT) Televisions

1 Answer

Setting up my freeview box- NO CHANNELS FOUND


The cable & wireless system is not capable of picking up the digital freeview frequencies.
Idealy you need to put a new aerial on the roof,
If this is not possible try an indoor aerial that you to plug in to the mains electrical supply.


Dec 11, 2007 | Standard (CRT) Televisions

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66409 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides