Question about Hitachi 42EDT41 42 in. HD-Ready Plasma Television

1 Answer

I have sound but no picture,

Could I have selected something on the remote that would make this happen

Posted by on

1 Answer

Re: I have sound but no picture, - Hitachi 42EDT41 42 in. HD-Ready Plasma Television Flat Panel Televisions

I think you might have a bad y-sus board

Posted on Oct 19, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My television screen went dark. I can get sound but no picture. I suspect that I rolled over on the remote and did something. However with no picture I don't know how to fix it.

The only thing I can think of is you somehow selected brightness when you rolled onto the remote and turned it right down, however if the TV is ok selecting such options would usually put a scale onto the screen regardless of how the brightness/contrast is set.

You might have damaged the remote. There have been incidences of remotes overheating when a button is kept pressed for an extended period and have even been blamed for causing a housefire.

Your tv might have some basic function controls on the set, perhaps behind a little door or somewhere at the back.

Aug 22, 2015 | Flat Panel Televisions

1 Answer

Tv has no picture but sound is ok

First of all, change the input device to something you know works for sure. Look for any jammed buttons on remote or on control panel. (This can happen, if you inadvertently sit on the remote hidden under a magazine or newspaper) Check the picture settings to ensure that these are ok. If problem persists, it might need attention by a qualified service technician.

Jul 22, 2012 | Flat Panel Televisions

1 Answer

Television with no picture, no sound

which television are you using? If there is a button on a remote named "INPUT" then press the INPUT button and select AVC. I hope it will fix the problem

Jan 01, 2012 | Flat Panel Televisions

1 Answer

Someone has pushed something on my remote all i can hear is sound but see no picture..What do i do? I own a Mitsubishi 65' Inch T.V!

Check device menu and select input till you get apicture. You could lookjto see what input you have a source connected to and switch to that input. May just have button marked input.

Aug 31, 2011 | Mitsubishi Flat Panel Televisions

1 Answer

My sony flat screen works but when I turned it on the colors are blue and purple. Picture not clear but sound is ok. Colors are off.

Press "Input Select" on the remote control and select "TV Mode."

Press "Menu."

Press "Enter" to select "Picture."Use the arrow buttons to select

"Picture Setting."

Press "Enter."Use the arrow buttons to select "Color."

Press "Enter."

Use the left and right arrow buttons to adjust the color settings. When you are pleased with the color setting, press the "Exit" button on your remote to exit the menu screen.

Hoped this helped

Mar 18, 2011 | Flat Panel Televisions

1 Answer

How to reset tv. Have sound but black screen

LCD's use a colorful crystal see through display which only visible when light is shining through it. if you have sound and no picture it's always a faulty PSU. Very easy to change out actually.

Mar 27, 2010 | Vizio GV42L 42 in. LCD Television

1 Answer

There is sound but no picture and there is no response when using the control buttons on side of tv or the remote. I turn the tv on and change channels thru Comcast cable.

Talked to a Westinghouse tech and told to unplug for about 3-5 minutes, then re-plug. It's like having to re-boot your computer when it goes down or starts acting wacky. It worked, I got picture. Says it could happen again, maybe 1-2 times a year is o.k., if it starts to happen every few weeks, then it's something more.

Oct 14, 2009 | Westinghouse LTV-37w2 HDTV

1 Answer

My 32" bravia will not show picture or sound but does show channel and program from cable my dog stepped on one of the remotes and that is when the problem started but i think my son in law did something...

Im sorry but im laughing about the son-in-law part. Try pushing the select button on the remote. the button might also say input, or line. Try those as well.

good luck

Aug 06, 2009 | Sony Bravia KDL-46V4100 46 in. LCD HDTV

1 Answer

Tv no picture

Have you checked the input on the tv yet? maybe someone changed the tv input using the video source key on the remote. Also check all the connections from the tv to your equipment like the cable from the cable box or wall. If the connections are good call a repair man. Its just something that happens, maybe a power surge. Call firedog

Nov 13, 2008 | LG 42LC2D 42 in. LCD HDTV

Not finding what you are looking for?
Hitachi 42EDT41 42 in. HD-Ready Plasma Television Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

66492 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 2 Expert

223 Answers

Are you a Hitachi Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides