The manual for the Uniden BC147XLT is not available on the Uniden website. Please contact their customer support via their website here: http://mycusthelp.com/UNIDEN/supportcontact.asp?sSessionID=&sEmail=
A few tips I found online:
Programming your scanner
1. Press Manual 1 Manual
2. Enter a frequency
3. Press E
4. Press Manual
5. Repeat steps 2, 3 and 4 as needed
6. When you finish the programming steps press Scan
Hope this helps!
Don't buy a book -- they're expensive, and they're out of date before they're even printed. For a comprehensive - and current - database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com
Bill B.
Listening in since the 60's
How do I program this type of scanner
×
229 views
Usually answered in minutes!
×