Reset projector lamp lg bx327 - Sony VPL-HS51A / VPL-HS60 Multimedia Projector

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/

Here is a link to the manual in case yo don't have it:
http://www.projectorcentral.com/pdf/projector_manual_6082.pdf

However it doesn't include counter reset instructions that I could find!

I didn't find specific 327 instructions, but here are 3 different procedures for other units:
Turn the power off but keep pluged in. Press the buttons on the control panel in the sequence as below.
Press "Up Arrow", Press "Down Arrow", Press "Left Arrow", Press "Right Arrow", Press "Menu", Press "Enter".

Lamp time will be initialized
Posted on Mar 01, 2008

• If you do not have a remote here is how to reset the filter time. Use the "Menu" bottun to get the "easy menu" to display. Push the down arrow until you get to "Filter Time," then push and hold the RIGHT arrow to reset the filter time. DO NOT try to reset using the "Reset" option on the easy menu, it will not work.
  Posted on Oct 02, 2008
• 
  
• SOURCE:Lamp timer on Sharp XV-Z2000 will not reset
  • I unplug my cord, waited for 5 minutes, then reconnect cord holding the power button at same time, released, then proceded with input, left arrow, enter, right arrow and depress power button again holding for 15 seconds, then released. projector warmed up showing the "0000H" on the bottom left of screen...that's how mine worked today.
    
    
• If/when you get it to work, please post back via comment to original question.

Download the user guide to this projector by the given link here. It has all details. http://www.projector-manual.com/manuals/lg/LG_BX327.pdf
http://electronicshelponline.blogspot.com/

you can pick up some plastics instead of it
Have a good day! any question ,contact me,Please
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry Lampdeng Limited
Mobile: 0086-13178867858
Wechat ID: 008613178867858
Whatapp ID: 008613178867858
Skype: [email protected]
http://www.lampdeng.com

You'll need to go into your system setup screen on the projector and reset the lamp counter. It doesn't know when a bulb is changed, so it is a manual process.

Check to see if your cable is ok and replace with another to prove first as if one of the pins is broken then this may cause a colour issue.

Turn on the projector and press the Menu button on the remote control.
Use the arrow keys to navigate to the Option menu and press Enter.
Navigate to Lamp Time Reset and press Enter.
A confirmation message will appear on the screen. Select Yes and press Enter.

remove bulb. replace bulb. within ten minutes press exit on projector and hold for three secs. then immediately press menu then press left or right arrow button. you are done. turn off then turn on

These instructions are taken from page 44 of the User Guide.

Turn the power off but keep pluged in. Press the buttons on the control panel in the sequence as below.

Press "Up Arrow", Press "Down Arrow", Press "Left Arrow", Press "Right Arrow", Press "Menu", Press "Enter".

Lamp time will be initialized