Need manual for Kodak m110 projector - Office Equipment & Supplies

Sorry we do not sell parts.

Kodak Service Manuals and Parts Lists will be tough to find.... but check with: www.micro-tools.com
They bought the entire service parts inventory from Kodak when Kodak decided to stop supporting slide projectors.
Good Luck !! Jim

If the projector cycles in FORWARD and holds SELECT when the SELECT button is pushed and held, then the projector simply needs a cycle solenoid adjustment. This can be accomplished by following the adjustment procedure in the Kodak Service Manual posted at: http://www.kodak.com/eknec/PageQuerier.jhtml?pq-locale=en_US&pq-path=6499
Good Luck !! Jim

Check your cables the system recognizes the projector. Usually
color problems are caused by faulty cables.

First of all, the shutter will only open IF there is a slide in the gate. Assuming there is a slide in the gate, there are 2 things that could be preventing the shutter from opening:
1. Most likely - the shutter is spring-loaded. If the spring unhooks or is missing, the shutter will not open.
2. There is an adjustment that needs to be made after the spring is replaced or re-hooked (or just is out of adjustment. Refer to the Kodak Ektagraphic Service Manual @ the Kodak web site: http://resources.kodak.com/support/pdf/en/manuals/slideProj/manual/ektagraphic_sm.pdf
Good Luck! Jim

Check with www.micro-tools.com for parts and manuals!! They have an amazing inventory of classic Kodak parts for slide & movie projectors! Good Luck !! Jim

See my other response! Check with the George Eastman House in Rochester, NY for leads on the manuals! Good Luck !! Jim

Kodak has an e-copy of the manual on their website:
http://support.en.kodak.com/app/answers/detail/a_id/19709

I hope this helps !!

You can download the User Guide from the Kodak website:
(http://www.kodak.com/global/en/service/products/ekn010374.jhtml?pq-path=6499/4529).

I believe they still have a .pdf version in the Kodak website (www.kodak.com - then search on "slide projectors).
If you have a specific question, re-post that question & I'll give it a go...