Question about GE 25953 Cordless Phone

1 Answer

Do not disturb

I have lost my owner's manual and do not know how to use the do not disturb feature. How to I set it and remove it? Do you have to have this feature through the phone co to work (like caller id)?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: do not disturb

When Lit it shuts off the ringers to all phones register with it (the headset that came with it up to 4 sets) and when not lit they ring. If you have another phone other than the 3 cradle sets they will still ring.

Your welcome

Posted on Dec 01, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Remove do not disturb

You need to enter the "Make Set Busy Deactivate Flexible Feature Code" - the "Flexible" part meaning the system administrator can change it, so you'll have to ask. The default appears to be #62.

Jun 20, 2014 | Nortel Phones

1 Answer

Program "Do not disturb" on business phone

From the manual: You need to program a button with FEATURE 01.

Do Not Disturb is available only on system telephones.
Do Not Disturb requires a button with lights. When the Do Not Disturb feature is on, the light
is also on, indicating that the telephone will not ring.
¦ Use Do Not Disturb when you do not want the auto attendant or the voice messaging system
to transfer calls to you.
¦ Use Do Not Disturb if you are assigned to a Hunt Group and you leave your desk, so calls to
the Hunt Group will skip your extension and ring immediately at the next available extension
in the group.
¦ To avoid missing calls when Do Not Disturb is not needed, turn it off


Mar 16, 2010 | Phones

1 Answer

00:DND showing on the screen, and the Feature light is blinking. Manual does not have a troubleshooting guide.

I found that pressing Feature -> 99 -> Feature cleared it up. The Do Not Disturb option does not work either with what the owner's manual states, or the company's Website, to either activate it or deactivate.

Aug 04, 2009 | NEC DTU 8D-2 Corded Phone

2 Answers

I set up ''do not disturb'' on my phone and do not know what is the code to bring it back to normal

Feature 85 puts do not disturb on the phone and feature # (pound) takes it off

Jun 10, 2009 | NorStar M7310 Phone

1 Answer

Power outage and lost features

The Privacy is part of FP1. You need to pick a button with a light, put the T/P switch in P, touch the button, dial *72, and put the switch back in the center position.

If that doesn't work, try Auto Ans Intercom or Do Not Disturb under the same button (*70,*71). If you can't get any of the features to work, I'm guessing that the FP cartridge needs to be replaced or power down the system and remove and insert the cartridge again.



Apr 07, 2009 | AT&T ATT / Avaya / Lucent Merlin 820...

1 Answer

How to disable do not disturb from Nortel phone

FEATURE 85 sets "Do Not Disturb", and to cancel any feature, add a # sign.

FEATURE # 85 will cancel it. :)

Jan 11, 2009 | NorStar M7310 Corded Phone

1 Answer


Not sure how you set this feature but here is the solution:

To set DND you would have pressed your feature button, 60,and then feature button again (if you were forwarding to another extension you would have had to enter an extention after 60 and then the feature button. This sets your DND or call forward.

To eliminate press feature, 69 and then feature again this should cancel the call forawrd or do not disturb.

Oct 01, 2008 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

Stuck on Do Not Disturb

Press Feature + 69 + Feature to cancel DND.

Feature + 60 + Feature turns DND on.

Apr 22, 2008 | NEC Electra Elite DTU 16D-2 Corded Phone

3 Answers

No ringing tone or incoming call sounds.

The primary phone sets the ring for all phones. If it is off, nothing will ring. Once it is on you may set the volume of the rings on all sets individually. If you have the manual, look under Ringer Off on the main set. Hope this helps, let me know

Feb 18, 2008 | Siemens optiset E Corded Phone

2 Answers

GE 2.4 GHZ Cordless Phone

1. Pick up the phone handset and dial *98.
2. Press 2 to disable Do Not Disturb.
3. Once you hear the confirmation that Do Not Disturb has been disabled, you may hang up the phone handset.

You can press "Feature" and then "69" and then "Feature" again
Hope this helps!

Nov 19, 2007 | GE 21028GE3 Cordless Phone

Not finding what you are looking for?
GE 25953 Cordless Phone Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Phones Experts


Level 3 Expert

94039 Answers

Cindy Wells

Level 3 Expert

4721 Answers


Level 3 Expert

56925 Answers

Are you a GE Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides