Question about Sony Cyber-shot DSC-T10 Digital Camera

11 Answers

Indication E:62:10 It's a flickering indication my camera recently shows in each mode. Besides, since several weeks it can be turned on extremely slow. Does it require a new battery pack?

Posted by on

  • 3 more comments 
  • grad Jan 04, 2008

    I have a Sony DSC T-50 with the same error code. This was brought on by dropping it on the floor! Local camera shop cannot fix as it must be carried out by Sony and the repair cost is not justified.

  • Anonymous Oct 10, 2008

    I went to fix it, took it to camera house. Was going to cost $435 dollars to fix. I am really disappointed as it is only 1 and half years old.

  • bay7 Oct 20, 2008

    flashing E:62:10 and i don't know what it means...since this started happenign my camera has been turning on extra slow as well.

  • Chica M Dec 21, 2008

    I have the same problem. How did you get it fixed and what does it mean

  • Anonymous Mar 10, 2009

    I was getting the error message so I whacked my camera but not too hard and now it won't switch on, any suggestions?



11 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I concur! I dropped mine about three feet, it hit the window sill and then the floor and came up flashing E:62:10 and E:62:12 a few careful whacks with lens cover closed and LCD up and they both went away. Sweet

Posted on Aug 05, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Wack it! it works

Posted on Jun 14, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same error- I tried wacking it against my leg- and now it works again!!! thank you!

Posted on Mar 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This SO works...just an inch off the table as somebody said...and mine went away...VOILA!! Thanks you people...I love fixes like this :-)

Posted on Apr 16, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Other than spending $400 on fixing this problem, I suggest banging the camera on your leg real hard with the lens cover up. I tried it and it worked really well.

Posted on Nov 28, 2008

Only need to an inch or so off the desk and just drop it with lense cover closed and camera off it works!!

Posted on Oct 02, 2008

Whack it hard! Worked great. Thanks!

Posted on Sep 28, 2008

Yes- that actually works!! i was banging it a bit but was not seeing a result - and finally i lifted it an inch or so from my desk and dropped it in the off mode with the lens cover closed, turned it back on and the error went away!!

Posted on Sep 09, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

This totally works hit it on my knee with the lens down and now working fine. Mine was flickering with a sometimes white screen and when i would take a picture it would flash completely white. It also was having lines like bad reception on a tv and banged it on my knee, now working fine!!!

Thank you for the fix,lol.

Posted on Jun 28, 2008

with the LSD side up, wack it!
on your desk, knees, anything.
I was hesitant because I thought it would break but I soon became really frustrated and banged it real hard with the lens cover down. WAHLAHH! it works perfectly fine now =)

Posted on Feb 02, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 188 Answers

No. it's due to malfunction in the lense assembly. All you can do is to get it repaired.

Posted on Oct 03, 2007

  • manikalyan Aug 10, 2012

    how much does it cost


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why are my gauges jittery and flickering when I start my car? Is this an indication of a major issue?

Check the tightness of the battery cables first. How old is the battery close to 4 years?

Sep 05, 2014 | 2004 Honda Pilot

2 Answers

Why my light status indicator next to the battery About the hard disk is not blinking anymore?

the indicator shows the activity of the hard drive - heavy constant use is a solid bright indication down to none when idle with various level of illumination and flickering at all times.

Aug 30, 2014 | ASUS K50IJD2 Notebook

1 Answer

WE HAVE A PHILLIPS TV # 34 PW9817 17 For the past week the tv has been powering itself off, when it goes out a red light flashes where the green on light would normally deplayed. We have to unplug it...

This is an indication that the unit is going into shutdown mode, may be due to a leaky capacitor on the power supply circuit or in the HighVoltae area. This is also an indication of cold solder joints that may be intermittent. Check or have the unit check by a technician for bad or poor solder connections around the flyback area of the unit.

Apr 17, 2011 | Televison & Video

2 Answers

Cannot set time @ date for Ohsen watch...AD0721...thanks

1.How to use the luminescence Any time indication,Press A the Luminescence will last for 3 seconds.
2.How to view date? Standar time indication, press C "month/ date" indication.
3.How to switch 12/24 hour systems In the normal mode, press B twice and press D twice ,then hold C until 24 hour system is actuated, then press B for recovering.
4.How to check alarm ring and alarm time? Standard time indication,press D alarm time indication.
5.How to set alarm time? Standard time indication,Press B twice. The hour area flickers,press C to set the hour. After setting hour ,press D,the minute area flickers, press C to set the minute. Last press B for recovering.
6.How to set alarm ring? In standard time indication mode ,Hold D then Press C this will toggle alarm symbol on & Off.
7.How to set Hourly Chime? In standard time indicationmode, Hold D then Press B DAY OF WEEK area toggle on and off.
8.How to use stopwatch(1/100 seconds) Press B,then Oress C for 1 timing; Press D for multiple timings. Press D once more to continue operation after multiple timing. Press D for 1 timing; press C once and press Dtwice for multiple timing. (1)Max range of the stopwatch is 23 hours 59 minutes 59 seconds. (2)When timing within 30 minutes, the watch indicates: minute/second/1/100 second (3)When timing beyond 30 minutes, the watch indicates:hour/minute/second
9.How to adjust time, date,day of week (1)Standard time indication,press B twice ,the second area flickers, pressC to adjust second. (2)Then press D the Minute area flickers,Press C to adjust minute. (3)Press D the hour flickers, press C to adjust hour. (4)Press D the Date flickers, press C to adjust date. (5)Press D the month area flickers, press C for adjustment. (6)Press D the Day of Week area flickers, press C for adjustment. Then press B for recovering.

Nov 30, 2010 | Watches

1 Answer

Battery indicator,interior and head lamps flicker

check heat shield around the cat ...if there is no heat shield should install one

Jul 25, 2009 | 2004 Ford Escape

1 Answer

Jvc video camera model gr-d250u is in safe guard

The error indications (01, 02 or 06) show what type of malfunction has occurred. When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.

Jun 11, 2008 | JVC GR-D250 Mini DV Digital Camcorder

1 Answer

E04 Safeguard mode due to Dirt head

1. The drum cannot be started or drum rotation is stopped
because tape transport load is too high.
1) Tape tension is extremely high.
2) The tape is damaged or soiled with grease, etc.
2. The DRUM FG signal is not received by the syscon
1) Disconnection in the middle of the signal line.
2) Failure of the DRUM FG pulse generator (hall element).
3. No drum control voltage is supplied to the MDA.
4. No power is supplied to the DRUM MDA.

Nov 06, 2007 | JVC 580136 Camcorder

1 Answer

Fuji f700

I recently had trouble with the LCD Display coming up with a black screen. So I mailed it to Fuji with a letter explaining the problem. About 3 weeks later I got it back in the mail and it seem to be working fine until a month later. I turned it on and the LCD display show a black screen only now it has white lines. I'm so incredible mad and extremely dissapointed in Fuji. Reading online I have notice many people having trouble with Fuji Products. I WILL NEVER BUY a Fuji again!!!

Jan 15, 2007 | Fuji FinePix F700 Digital Camera

Not finding what you are looking for?
Sony Cyber-shot  DSC-T10 Digital Camera Logo

936 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts


Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

james laughton
james laughton

Level 3 Expert

2189 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides