Question about Creative Labs ZEN Vision:M Digital Media Player

1 Answer

Zen vision m 60 Gb dont want to be charging

I have zen vision m 60gb, its long i dont use it, but yesterday when i want to use, the battery is empty n want to be charging. the problem is i already charging but the battery is dont wanna full, the indicator is still red... what the problem.... thx

Posted by on

  • flysurfglide Jul 19, 2008

    Creative Labs ZEN Vision:M,30G. Has not been used for a while.When I plug the power cable to charge the battery, the unit start, but no charging icon. It is only the icon for your unit is running from external power and has finished charging the battery. That's wrong, because when disconnected, it turns off and it cannot be powered on. The battery is not charged. It is not charging. Is the battery death or it is a software problem? Or something else? Please,help. Thanks.


  • Anonymous Mar 04, 2009

    upgrading the firmware doesn't work - have same problem

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 55 Answers

Upgrade the firmware to version 1.62.02. That should solve all your problems. Go to www.creative.com to download the firmware.

Posted on Sep 29, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a creative micro photo zen i pod. it have memory "8 gb " . but it shows its free memory about "20 mb" & there is no option exclude, (1)disk clean up (2)format. please tell...


The heading for your question says "Creative Zen Vision:M Digital media" I do not think that there was an 8GB Vision M. I have a 30 GB Vision M and I think there was only a 30 and a 60 GB of that model.Perhaps you have another model, and it could be a 20gb, as that what you may be seeing. Any way look on the back and select your model from the Creative page here: http://support.creative.com/Products/product_list.aspx?catID=948&CatName=Entertainment+Devices+%2f+MP3+Players#

It will tell you the specs of the model you have. a further search of the site could also answer some of the questions you have about the player.

Dec 27, 2010 | Creative Labs ZEN Vision:M Digital Media...

2 Answers

My creative zen won't turn on it's vision m 30 gb and when you plug it in all it dose is flash It doesn't pop up or even say anything in my computer PLEASE HELP


I am unable to reset my ZEN Vision M player. It will not even connect with my computer and the battery is completely dead. Is there a solution?

Jul 03, 2009 | Creative Labs ZEN Vision:M Digital Media...

2 Answers

Zen m wont turn on


Well, it needs to charge via USB on your computer, so plug in your zen into the computer with the creative usb cord, and let it recharge. It may not necessarily turn on if it's really out of battery, but you can tell its charging when the switch you use to turn on and off, and hold, the light is blinking. After sometime, your Zen screen on the upper righthand corner should show a little battery and be blinking green what stage it's at in its charging. When its done charging the battery icon with be fully green, not blinking, and have a little plug icon inside of the battery icon to indicate that it is fully charged--takes a couple of hours to charge.

If that does not work, check your USB cord to make sure it's not damaged in any way. If it is, you may need to purchase a new one for better connection. And if that doesn't work, then you might need to replace the battery altogether, which I'm sure, if you are still in your manufactuer's warranty, they can do for you. After it is replaced, your zen should be good as new and ready to operate.

Hope this helps. Good luck!

Jul 17, 2008 | Creative Labs ZEN Vision:M Digital Media...

2 Answers

ZEN VISION M STUCK IN RECOVERY MODE


im having that sme problem! even when i try 2 restart it still acts crazy! when u find out how 2 fix ur let me kno cuz really want this thing 2 start workin again

Mar 15, 2008 | Creative Labs ZEN Vision:M Digital Media...

2 Answers

Zen Vision M 60GB


Go to creative's website, they have an auto fix tool.

here ya go^^

http://us.creative.com/redirect.asp?id=5857

Jan 09, 2008 | Creative Labs ZEN Vision:M Digital Media...

4 Answers

CREATIVE ZEN VISION MZEN VISION M TECHNICAL SUPPORT


read this:
http://www.anythingbutipod.com/forum/showthread.php?t=10960

Dec 12, 2007 | Creative Labs ZEN Vision:M Digital Media...

Not finding what you are looking for?
Creative Labs ZEN Vision:M Digital Media Player Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

620 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mohamed Ismail
Mohamed Ismail

Level 3 Expert

462 Answers

Are you a Creative Labs Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...