- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Do a factory reset. There are two methods to reset TVs. Hard reset and factory reset. To make it a hard reset unplug the set from the AC mains wall socket and reinsert after an hour or so. To make a factory reset you have to enter it's service mode option. If you wish to get more details visit the site linked here. http://electronicshelponline.blogspot.com/http://homenol.blogspot.com/
Remove the Battery from the Camera then press and hold the power button for 30 seconds. Then, reinsert the Battery pack and turn on the Camera and reset it to the original factory settings by selecting the "Initialize" option under Setup1.
If the issue persists then service will be required.
Please turn off the Camera and pull out the Battery then press and hold the Power button for 30 seconds. Next, reinsert the Battery and turn ON the Camera then reset it to the original factory settings. Furthermore, please ensure that the Battery pack in the Camera is fully charged.
Follow the steps given below to reset the Camera to the original factory settings:
Press the Home button then select Settings, Main Settings 1 using the control button. Next, select Initialize and OK. This will reset the Camera to the original factory settings. If the issue persists then the issue is related to the image sensor of the Camera and service will be required to get it fixed.
Please remove the Battery from the Camera then reinsert it after three minutes. Please make sure that the Battery is fully charged. If menu options are accessible then reset the Camera to the original factory settings. Please follow the steps that are mentioned below to reset the Camera to the original factory settings. (i) Turn ON the Camera. (ii) Press the Menu button on the Camera to display the menu options. (iii) Then use the control button on the Camera to the select the Setup option. (iv) Next, select the Setup 1 option then "Initialize".
Performing the above steps will reset the Camera to the original factory settings. If the issue persists even after resetting the Camera to the original factory settings then service will be required.
The EVOLT E-500 does not have a live view LCD screen so you can see the image you wish to take a picture of. You must use the viewfinder to take images with this camera and only use the LCD to review the images.
As far as to reset the camera back to factory defaults, you need to turn the camera dial to P go to the Menu and on the camera 1 tab right arrow over and then arrow down to custom reset setting and then hit the right arrow highlight reset and press ok it will show reset yes or no highlight yes and press ok this will reset the camera back to its factory settings
I assume you mean when pressing the W or T buttons the zoom feature does not work. Try to reset the camera to the factory default settings and this should enable the zoom feature to work again. To do this go to Ok button and then to Mode Menu - then to Setup tab and then right arrow to Reset. hit the right arrow and you will see Reset Yes or No. Highlight Yes and press Ok. Camera should be in factory settings and zoom option will function.
Hey Realblond, I would try resetting the camera back to factory specifications. You can do this by selecting mode reset under the shooting mode menu. If this doesn't work I would have it looked at be an authorized service technician. Sincerely, Allan Go Ahead. Use Us.