Question about Office Equipment & Supplies

1 Answer

My cannon ir2380 gives out light prints even after replacing the Toner, OPC Drum and wiper bade. How humidity effects quality of copy in a copier? Please help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 207 Answers

Try cleaning the printer heads, toner can build up on the heads.

Posted on Oct 22, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 86 Answers

SOURCE: Toshiba 2860 Plain paper copier

It maybe the waste toner container is full try emptying it

Posted on Feb 19, 2008

  • 53 Answers

SOURCE: xerox 5305 copier excess toner

sounds like faulty drum cleaning blade,which is usually contained in the replacement drum module.I would be inclined to take the drum unit back where you got it (unless you replaced it with a second-hand one) 99% certain the problem is contained in that module

Posted on Feb 27, 2008

FixinFax
  • 3085 Answers

SOURCE: black vertical line on prints and copies. 20

It appears that the Teflon is worn off of the roller. You will have to have the FUSER replaced.

Posted on Jun 16, 2009

  • 114 Answers

SOURCE: 'check toner/drum crg' error, Cannon imagerunner 1370f

check the contacts inside of copier cavity where they line up with drum unit and make sure they are in correct position.

Posted on Mar 21, 2010

Geekman
  • 32281 Answers

SOURCE: I have a brother HL-2130, the toner light came on and the printer doesn't want to print anymore, even after i have replaced the toner with a new one. Can anyone give me some advice please?

This WEB site shows how to reset your printer after install a new toner.
http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/faq/faq/000000/002500/000017/faq002517_003.html?reg=us&c=us_ot&lang=en&prod=hl2130_all

Posted on Apr 04, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon irc4580i print dark problem


In the process used printer, will be inevitable printed page by your printer have the bad quality prints. For example: Toner specks, Light image, Vertical line, Dropouts, background, Toner smear, Vertical black line and band, Vertical white line, Background scatter, Black pages, Loose toner, Horizontal stripes, Ghost, Uneven Density, poor fusing ...
The common print quality problem Canon IRC-4580 printer
Currently, The Canon IRC-4580 is the laser printer have high speed, easy to use, friendly for user and printing clear text.
However, we can not avoid the damage of some components of the printer when used.
In this article, I will introduce some basic errors with printing quality problems of Canon IRC-4580 printer and "How to fix it".
After viewed artical, you know:
- How to fix (repair/solve) Vertical line (black or white) in Canon IRC-4580 printer
- How to fix (repair/solve) Poor fusing (loose toner) in Canon IRC-4580 printer
- How to fix (repair/solve) Uneven Density in Canon IRC-4580 printer
- How to fix (repair/solve) Light image in Canon IRC-4580 printer
- How to fix (repair/solve) Ghost in Canon IRC-4580 printer
1. Fix print quality problem "Vertical line" for Canon IRC-4580 printer How to fix print quality problem Vertical line
This plobrem "Vertical line" is usally error of Canon IRC-4580 printer. For this "Vertical line" error, technicians divided into two smaller error are: Vertical black line and band and Vertical white line.
Description:
- Vertical line and band: On the printed image appear some straight thin black vertical.
- Vertical white line: On the printed image appear some white vertical voids.
Error location:
- Surface of the charge roller
- OPC drum
- Cleaning blade
- LSU unit
- Developing roller

Cause of error "Vertical line" on the printed page:

- May be surface of charge roller scratched or dirty by toner powder.
- May be have some grooves on the OPC drum.
- May be cleaning blade is damaged.
- May be LSU window or LSU lense has dirty.
- May be surface of developing roller has scratched.

How to fix(repair) "Vertical black Line and Band" for {{SPkey1}} machine:

- Replace the charge roller of toner cartridge.
- Replace the OCP drum.
- Replace the cleaning blade
If printed page are not improved
- Clean the LSU unit by soft cotton cloth and try to print. If Vertical line is not clear on the printed page you should replace LSU unit.
- Replace new axis developer and try to print
2. Solve print quality problem "Poor fusing (loose toner)" for Canon IRC-4580 printer. How to fix print quality problem loose toner
Description loose toner: Toner is not properly fixed on paper, use to hand rubbing lightly on the printed image toner powder may be stick in hand
Error location: toner cartridge or fuser unit

Cause of error "Dark Image or black" on the printed page:

When toner cartridge is empty. You toner refilled by toner powder ware not compatible. This is makes toner cartridge components demaged and temperature of fuser unit is not enough melt to toner powder

How to fix(repair)"Poor fusing (loose toner)" on the printed page for Canon IRC-4580 printer:

With this error, you should replace toner cartridge or fuser unit to fix it.
3. How to fix print quality problem "Uneven Density" for Canon IRC-4580 printe How to fix print quality problem Uneven Density
Description: The printed page has one half light and one half clear.
Error location: Toner cartridge, transfer roller, springs, doctor blade

Cause of error "Uneven Density":

- The pressure force on the left and right springs of the transfer roller is not even.
- May be toner low also causes this error
- Doctor blade has bent
How to repair error "Uneven Density" on the printed page for Canon IRC-4580 printer:
- Replace springs and transfer roller.
- Toner refill toner cartridge Canon IRC-4580 and reset toner cartridge chip (replace new chip) or replace new genuine toner cartridge.
- Replace doctor blade.
4. How to solve print quality problem "Light image" for Canon IRC-4580 printer How to fix print quality problem light image
Description: The printed image is all light and no Ghost.
Error location: Toner cartridge, Developer, HVPS board

Cause of error "Light image" on the printed page

- Enabled toner save.
- Toner cartridge is low
- OPC drum may be faulty by strong light intensity
- Temperature in room is below than 10*C
- Bad contact caused by the toner dirty between the high voltage terminal in the HVPS and the one in the set
- Abnormalities output from the HVPS

How to fix(repair) error "Light image" on the printed page for Canon IRC-4580 printer:

- Disable toner save by change in printer driver.
- Toner refill toner cartridge Canon IRC-4580 and reset toner cartridge chip (replace new chip) or replace new genuine toner cartridge.
- Replace the OPC drum.
- Replace developer.
- After printer is power on, wait 30 minutes then start printing
- Clean up the contact between the high voltage terminal in the HVPS and the one in the se- Replace the new HVPS if the problems are not solved by 4 away above.
5. How to fix print quality problem "Ghost" for Canon IRC-4580 printer How to fix print quality problem Ghost
Description: Ghost occurs intervals of the OPC drum or transfer roller.
Error location: Toner cartridge, Developer, HVPS board

Cause of error "Light image" on the printed page

- OPC drum has fauty.
- The life of the transfer roller has been expired
- The high voltage terminal is contaminated by toner powder or

How to fix(repair) error "Light image" on the printed page for Canon IRC-4580 printer:

- Replace OPC drum
- Replace transfer roller
- If performed 2 away and the error does not clear, you should replace ganuine toner cartridge .
- Replacce HVPS board.

Oct 29, 2016 | Canon Office Equipment & Supplies

2 Answers

Is it the opc?


THIS IS THE OPC DRUM COMPLAIN PLEASE REPLACE THE OPC DRUM &WIPER BLADE .

Mar 15, 2014 | Samsung Office Equipment & Supplies

1 Answer

Poor copy quality - smudgy copies - changed toner - still the same.


check your OPC drum life, if you have a poor quality with a new cartridge installed (light copy, dirty copy) the opc drum must be replaced, check you machine counter if you have reach 100k copies you need to replace the drum, if you are using a new OPC DRUM, you need to clean the machine, you have to call for service because there is many parts that muat removed to clean properly.

Dec 27, 2010 | Canon NP 7130 Black and White Copier

1 Answer

Will not print out a complete copy, gives red light signal when trying to copy, and gives a "dirty" copy. we need to unplug, and/or hit the reset button everytime we use it, and occassionally it...


  1. you have to check the counter, if you get a bad copy quality it can be the cause of opc drum life end.
  2. if you are using a new OPC drum, you need to clean the copier, it must be doing by a technician,
  3. when you get the red light signal: look at the LCD and read the error message displayed. it can gives you an idea about the problem. you post your problem again on Fixya or just live a comment for this solution i will answer you.

Dec 27, 2010 | Canon PC-D340 Black and White Copier

3 Answers

Black smudges down left side of page


How do I clean white or black spots on printed documents? Description: First make 10 to 15 copies of a blank, white sheet of paper.
If you still see the spots on printed documents after making multiple copies, clean the drum unit as follows:

  1. Remove the drum unit and toner cartridge assembly, and then remove the toner cartridge from the drum unit.
  2. Position the print sample in front of the drum unit so you will know the exact position on the drum that is causing the poor print.
  3. all-ug-19.gif
  4. Turn the black gear on the drum as you check the surface of the OPC drum.
    The OPC drum is photosensitive so do not touch it with your fingers.
  5. all-ug-20.gif
  6. When you find the substance on the drum surface that matches the print sample, gently dab the surface of the OPC drum with a cotton swab that is lightly dampened with isopropyl alcohol.
  7. Note
      • Do not use a scrubbing or wiping motion because this might damage the drum.
        all-ug-21.gif
      • Do not try to clean the surface of the OPC drum with a sharp object, such as a ball-point pen, because this might cause permanent damage to the drum unit.
  8. If the print quality still has not improved you need to install a new drum.

Dec 02, 2010 | Samsung ML 2010 Laser Printer

1 Answer

Hello cannon gp215ge, the first copy is I


Sounds like you have a bad drum. If a mirror was dirty, all prints would be light.

Sep 25, 2009 | Office Equipment & Supplies

3 Answers

How many copies should a copier produce before changing a drum


I bought a km1620 copier. but copied only A4 size paper. No longer paper can not print except A4 paper. how can I change copying system. And how can I count copy. pls. mail me.
mizan

Jun 12, 2009 | Kyocera Copystar CS-1620 Black and White...

1 Answer

Label stuck on a roller?


Looks like label stuck on the toner cartridge. Easiest solution would be to replace toner cartridge or if you can slowly spin the OPC drum on toner cartridge till you find label NOTE: damage to the OPC drum with affect print quality as well as oil from fingers will affect PQ( print quality)

Jan 13, 2009 | HP LaserJet 5000n Printer

3 Answers

Four dots middle of page


How do I clean white or black spots on printed documents? Description: First make 10 to 15 copies of a blank, white sheet of paper.
If you still see the spots on printed documents after making multiple copies, clean the drum unit as follows:

  1. Remove the drum unit and toner cartridge assembly, and then remove the toner cartridge from the drum unit.
  2. Position the print sample in front of the drum unit so you will know the exact position on the drum that is causing the poor print.
  3. all-ug-19.gif
  4. Turn the black gear on the drum as you check the surface of the OPC drum.
    The OPC drum is photosensitive so do not touch it with your fingers.
  5. all-ug-20.gif
  6. When you find the substance on the drum surface that matches the print sample, gently dab the surface of the OPC drum with a cotton swab that is lightly dampened with isopropyl alcohol.
  7. Note
      • Do not use a scrubbing or wiping motion because this might damage the drum.
        all-ug-21.gif
      • Do not try to clean the surface of the OPC drum with a sharp object, such as a ball-point pen, because this might cause permanent damage to the drum unit.
  8. If the print quality still has not improved you need to install a new drum.

Sep 11, 2008 | Brother MFC 7420 All-In-One Laser Printer

2 Answers

Light Copies Canon imageCLASS D320


hi im jules_09,check the developer,if its past over 60,000 copies if its over 60,000 copies you need to change the developer along with the opc drum and cleaning blade or roller,all copiers need to be replaced with new developer,opc drum and cleanign blade or roller when it reach its copy life,that may be the cause of light copy of print

Nov 21, 2007 | Canon imageCLASS D320 Digital Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...