Question about Music

1 Answer

HOW DO I RUN A MONITOR THROUGHT THE BEHRINGER MX1804X?

Posted by on

  • 2 more comments 
  • DAVE
    DAVE Oct 23, 2013

    That's great, thanks for that Darren. We got it working
    last night, but the main Aux fader did nothing - we had to use the individual
    Aux knobs. Any ideas what we might have been doing wrong....?

    Also, we have borrowed a foldback at the moment, but want to get
    our own. Have you any recommendations for what to use with a Behringer
    Eurodesk MX1804X and two Behringer Eurolive 300D speakers? Someone
    suggested a Behringer 610 (600w), although I can't find anything that matches
    this on the Behringer website.

    Thanks for your help.
    Dave

  • Darren Stagg Oct 24, 2013

    You weren't doing anything wrong...I caused that confusion. The aux fader would be used if you were returning back to the board, as in an off board effects unit. For monitors you're only sending but you still have to pay attention to the "aux send" level - it's a knob above the fader. That's where you'll get your "master" monitor send level.

  • Darren Stagg Oct 24, 2013

    You weren't doing anything wrong...I caused that confusion. The aux fader would be used if you were returning back to the board, as in an off board effects unit. For monitors you're only sending but you still have to pay attention to the "aux send" level - it's a knob above the fader. That's where you'll get your "master" monitor send level.

  • Darren Stagg Oct 24, 2013

    In terms of the monitor itself...I've always preferred in ear monitors as opposed to floor wedges. I haven't used wedges enough recently to recommend a current product.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

If you're trying to get a monitor feed from this unit, use the "aux" send. Connect the "aux send" to your monitor amp. The main Aux fader provides "master" level and the "aux" knob for each channel allow you to "mix" your monitor signal.

Posted on Oct 23, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't hear playback through Headphone socket, only through speaker monitors!


i suggest you contact Behringer Customer Service for advixce. Without the setup in front of me, it's hard to figure out the wire routeing, switch positions, ect. that may be leading to this problem. As they would be the people most familiar with the gear, they'sd be the people to ask. http://www.music-group.com/support/behringer/askquestion

Oct 28, 2016 | Behringer Music

1 Answer

Powering on and off


Like as not, Behringer is a disposable brand once the warranty (which does not cover wearing parts like pots and faders which wear out quickly and are not worth replacing due to the design in most cases)

We normally sell behringer kit if it still works just before warranty expires.

Feb 13, 2014 | Behringer Eurolive B205D Active 150-Watt...

2 Answers

Where can I get a schematic for the output section of the mixer on a behringer 1280s?


No hope. I have replied to this sort of question elsewhere but Behringer are very protective of their stuff and won't even let us have diagrams. Only Behringer service. If anyone has any Behringer service manuals / schematics we would love them

Oct 31, 2013 | Behringer B3031A 2-Way Active Studio...

1 Answer

Behringer ms 40


I'm not sure what kind of problem you are having on this but I have been trying fix a Eurolive B215D powered monitor for a friend for over 6 months. I have found that I could fix it in a few hours but, can't find any record of the components used. Standard resistors, caps, and others but certain things like output transistors and more specialized spec components can't crossover to generics for repairs. The only way to get them is through Behringer manufacturer AND they want to sell you a new on instead of fixing the old one. Can't seem to get parts for Behringer equipment. I have talked to other techs that say the same.

Mar 12, 2013 | Behringer Ms40 40w Active Powered Studio...

1 Answer

I have a behringer pmp 1280s. I was running two speaker and two monitors through it. One of the monitors was kicked and the patch cable to it was bent. I smelled smoke and the sound coming through turned...


That's a bad sign. A dead short in the output results in a short of the audio output transistors. I believe that to be the problem and a fairly simple fix to someone good at soldering BUT, you can't get parts for behringer equipment. Most components are specially made for behringer. I've been working on an amp for 6 months and I can fix it BUT, I can't find the parts anywhere, or can even find any reference to them online. Without a reference to the specs, I can't even get a generic replacement. Check your music stores in you area, a behringer dealer may can help you.

Mar 03, 2013 | Music

1 Answer

I have a Behringer sx2442fx mixer,and when i try to use my aux 1 and 2 channels for monitors it doesn't seem to be working. I sthere a chance that i have a button or something on the board thtas p


Make sure that you have enable the main monitor volume at the end of the mixer. They are labeled AUX1 and AUX2 as well located under the last channel of the mixer. If those are on 0 your monitors won't work

Jan 19, 2012 | Behringer Sx2442fx Eurodesk 24channel...

1 Answer

Anyone know a source for schematics for this item?


Behringer is the only source or an authorized repair facility. I have a site for some of the Behringer stuff, but not this product. They will only release the schematics to their authorized repair people. Getting parts is another whole nightmare.

Sep 05, 2011 | Behringer New! Behringer Truth B2030a...

1 Answer

Will a Behringer UB2442fx-PRO run 2 main PA speakers plus two passive stage monitors without blowing up?


ALL the speakers will either have to be POWERED or have external amplifiers. The mixer has NO power amps capable of driving speakers. When connecting, make sure that the mixer is powered by the same receptacle as the speakers or amps. Used balanced line for interconnection.

Jan 24, 2011 | Behringer Music

1 Answer

How do I get the USB input into the monitor channel on a Behringer Xenyx1832usb


I suspect that you don't, at least easily.

Try this:

IF you can send it to the mains, run a cable from the mains 1/4 jack back to an unused channel input. Set the monitor level on that channel to send the mains back out to the monitor so that anything on the mains from USB will be in the monitors... This is hokey and you have to disable this channel by not sending it to the mains, from the mains lest the thing will oscillate.

As versatile as this Behringer stuff is, I rather doubt that the USB can be routed directely by setting to the monitors... But just ry to find documentation about this!

Typical of this brand, finding and understanding the documentation can be frustrating.

Apr 25, 2010 | Behringer Xenyx 1002fx Mixer 10 Input 2...

2 Answers

Finding a way to hook this up


Send main 1 out to your Crown. Jump Mon send to PWR am insert.

Mar 11, 2009 | Behringer Pmp3000 16 Channel Audio Mixer

Not finding what you are looking for?
Music Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Music Experts

Vito Vacirca Jr.

Level 2 Expert

140 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...