Do you use the on board or do you have a video card
Same Problem
May 10, 2009
-   packard bell imedia alt-col2 just wont recognise the screen mouse keyboard or even the cd drive and makes the worst noise i have ever heard from a computer.
-   Guest
Find out what's making the noise first. It's either your fan or your hard drive. Check to make sure the noise your're hearing isn't your fan cutting into one of your wiring harnesses. That could be why you have the video problems. If it's your hard drive making the noise, that means it's on it's way out and you should immediately back up your files on disk and replace the drive before you lose everything.
i have gate way e series one day i turned it off to move it when i went back to turn it on the fan...
(More)
i have gate way e series one day i turned it off to move it when i went back to turn it on the fan barley started to spin and eventually stopped spinning completly i cleaned it and still nothing happens
I have a gateway gm5478 model pc with a 22inch lcd gateway fpd2275w monitor(purchased 12/07) for...
(More)
I have a gateway gm5478 model pc with a 22inch lcd gateway fpd2275w monitor(purchased 12/07) for family use and the monitor started giving me the no signal display about 3-4 months ago and has increased in frequency to the point now that I once it happens I can't get it to recognize the computer. Did all the usual fixes reset and powered everything down,disconnected and then reconnected after a couple of minutes.
The camcorder was working great. I was going to transfers the Hi-8 casettes to a DVD and now have no...
(More)
The camcorder was working great. I was going to transfers the Hi-8 casettes to a DVD and now have no sound on the camcorder? Any solutions. Thanks.
my screen keeps highlighting brightness.it makes the screen flash,i have the sreen on low power as...
(More)
my screen keeps highlighting brightness.it makes the screen flash,i have the sreen on low power as on hight power it keeps flashing and going dark.its nearly impossible to watch,if i turn up brightness and contrast to 100 it stops flashing. hope someone can help as i dont want to get riped of by spainish tv repair man. cheers