Question about Whirlpool RBD306PD Electric Double Oven

Open Question

Whirlpool RBD306PD turn off of breaker and back on -the oven will heat for 20 seconds and quit. turn the breaker back off/0n and it will reset and heat for 20 seconds- control panel does not lite up

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 833 Answers

SOURCE: Whirlpool Double oven - control panel stopped working

Atlanta...sounds like you may have a power supply problem or the panel is bad. Cut the power, open the unit up and see if there is a fuse in there or a reset. No good? Then replace the circuit board. They just, well, die sometime. Happened to my microwave. Some units may be available remanufactured. Look around on the web.

Posted on Dec 07, 2007

Ad
  • 25 Answers

SOURCE: Whirlpool wall oven stopped working after power outage

Ouch...sounds like the control module is blown. Thats the electronic timer. I've known this happen on several occasions. Bad luck!

Posted on Jun 25, 2009

  • 84 Answers

SOURCE: Whirlpool RBD305PD has error F2E6 error on control panel

When this code appears and display is going blank too, it is always the control board. The only option is to buy a new one or get it repaired. It can be fixed quickly and reliably. www.fixyourboard.com

Posted on Nov 09, 2009

  • 2 Answers

SOURCE: how to remove the control panel on Whirlpool double oven Model RBD305PDS14

Emge & Associates is investigating gas and electric ovens manufactured by Whirlpool, including such popular brands as Whirlpool, Jenn-Air, KitchenAid and Maytag.
The firm is investigating reports that the electronic control panel on certain models is subject to failure after a limited number of uses of the appliance’s “self-cleaning” setting. While most foods are cooked at temperatures reaching 375 degrees, the “self-cleaning” setting raises the interior oven temperature to 1,400 degrees. Due to defects in the design and or manufacturing, the electronics contained on many ranges are damaged by extremely high heat. Repairs to damaged control panels typically cost in excess of $300 per replacement.
If you have experienced failure of the control panel in your range after using the “self-cleaning” setting, you can join this investigation by contacting Emge & Associates at (800) 629-3409 or (619) 618-2974.

Posted on Dec 19, 2009

fixyourboard
  • 310 Answers

SOURCE: My Whirlpool oven stopped heating. The control

There is a thermal fuse mounted on the back of the oven that feeds power to both elements. This fuse has open up. The control panel gets power via a different path and still lights up.

Posted on Jun 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool built in electric oven


The upper element is for broiling and should not come on until you tell it broil. If it is coming on as soon as you turn on the breaker then it sounds like the printed circuit control board is bad. There is a relay on the board that engages when you program in the broiler. The relay can be hard to find and may not be removable. My broiler would come on when I programmed in the bake mode, go into runaway heat, put up a F10 code, and shut off. I could not clear it until I programmed in the clean mode for 2 hours. Now it works great.

Sep 07, 2014 | Whirlpool RBS275PD Electric Single Oven

1 Answer

Error E7 : F1 GMC275PDs07. Microwave works normally but will not heat. Magnetron changed out and still will not heat.


If your microwave is a 220 then reset the breaker by turning it off for 10 seconds and then back on. Then check it. Since you replaced the magnetron, the signal to the mag is interrupted. Did you replace the control panel? If so, then look to see if it is wired back in order. Does the fan operate when you open and close door? If not, then check door switch.

Feb 24, 2013 | Whirlpool GMC275PD Electric Double Oven

1 Answer

Have Whirlpool electric range super capacity 465 with accubake system oven will not shut off


Karen, We are sorry to hear about your Oven. We are happy to look into your concerns but we will need your your address, phone number, the model and serial number, the website you were contacted on, Fixya, your review ID, and date of purchase to Whirlpool_Digital@whirlpool.com.

Jun 12, 2017 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

I Have the whirlpool Oven RBD306PDQ8 - The power went out in our neighborhood, when it came back on the clock display will not appear. We can set the clock, it stays on the panel for about 10-20 seconds...


When the power came back on, it sent a power surge to the ERC (clock assembly). Try turning the oven breaker off for 10-15 minutes, this is to reset the ERC. If the display still doesn't work, you will need to replace the ERC-Electronic Range Control.

Oct 04, 2009 | Ovens

1 Answer

The wire that connects the heating broke off on


You're going to have to pull the walloven and take off the back panel. And probably replace the high temp terminal on the wire. You may want to pay a pro for this. You mess up the cabinet it's your problem but a reputable service company has experience and insurance and the right equipment to remove the oven

Aug 06, 2009 | Whirlpool RBD306PD Electric Double Oven

1 Answer

Circuitry may have gotten tripped during clean cycle. Oven will open and electronics work but neither element will heat.


baked control module for heating elements. if you have a volt meter, check for power when oven on, if no juice its the control element, if you do get juice then its the elements

May 28, 2009 | Whirlpool GBS277PRS Stainless Steel...

1 Answer

Self clean doesn't start


i would pop the top up and see if there is a bad switch on the handle that locks the oven.

Feb 13, 2009 | Whirlpool RBD306PD Electric Double Oven

2 Answers

Whirlpool oven accubake system


I have a whirlpool accubake wall oven. Half-way through baking a pie ,unknown to me, the oven went to the self-clean mode , the door locked and the pie started to burn. I tried to turn the oven off but it would not cut off. I immediately ran to the house's main power and turned off the oven breaker. I waited for a short time to let the oven cool enough to open the door and get the burned pie out, then went back to turn my breaker back on and the oven (even though in the off mode) started heating again with the bottom unit turning red again. I had to then go back and pull the power. We tried this several times trying to push the off button but the oven will not go off until we throw the breaker. Help please!

Jul 01, 2008 | Whirlpool RBS245PDS Electric Single Oven

1 Answer

Built-in Electric Double Oven


The fan is controlled by a temperature sensitive switch. Apparently the switch is not shutting off when it should. It will have to be replaced. If you are not comfortable working around appliances, you will need to call a service technician. There is usually a set of maintenance instructions in the top of the oven. Check it out for any suggestions. Temperature switches can be purchased on line.

May 18, 2007 | Whirlpool RBD306PD Electric Double Oven

1 Answer

Oven stopped working, door stuck in lock position


Tuck, sounds like your Thermal cut out opened on the back of the oven. You will have to get at this in the back of the oven. Part number 4451442. Look it up on the net so you know what your going after. This is a common deal on built ins. Going to need some help in pulling the oven out so far, removing the back panel and changing the TCO...Catriver Post back.

Oct 21, 2006 | Whirlpool RBD306PD Electric Double Oven

Not finding what you are looking for?
Whirlpool RBD306PD Electric Double Oven Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

ashburton

Level 3 Expert

417 Answers

Sal DeAngelo

Level 3 Expert

2341 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...