- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Please follow the proper instructions given below to successfully pair your Nokia E63 with the Nokia BH-213 Bluetooth Headset.
1.Ensure that your phone is ON and headset is OFF. 2.Press and hold the multifunction key (for about 5 seconds) until the green indicator light starts to flash quickly. 3.Activate the Bluetooth feature on your phone, and set it to search for Bluetooth devices. 4.Select the headset from the list of found devices. 5.Enter the passcode 0000 to pair and connect the headset to your phone.In some phones,you may need to make the connection separately after pairing. 6.When the headset is connected to your phone and is ready for use,the green indicator light flashes slowly.
However if you are having problem with the Bluetooth connectivity of your phone the most probable cause may be a malware attack.It can be solved by cleaning your phone memory by entering *#7370# on your phone and restoring the default settings when prompted.Make sure you back up your contacts to the memory card or copy it to the SIM directory.
Hope you are satisfied with my solution.Thanks for choosing Fixya.
After switching on the headset activate the blue tooth on the Nokia and search for the devices in the vicinity. If there is no finding then check if the phone detects another device, a phone or PC . If so the headset must be checked to be faulty with another PC or phone to confirm.
1.Ensure that your phone is on and
the headset is off.
2. Press and hold the multifunction
key (for about 5 seconds) until the
green indicator light starts to flash
3. Activate the Bluetooth feature on
the phone, and set it to search for
4. Select the headset from the list of
5. Enter the passcode 0000 to pair
and connect the headset to your
phone. In some phones, you may
need to make the connection
separately after pairing.
When the headset is connected to
your phone and is ready for use, the
green indicator light flashes slowly.
I also experienced the same problem. After trial and error I realized that the bluetooth device needs to be reset to fix this issue.You may reset the bluetooth device by deleting the pairings from the headset or reseting the headset. Switch off the headset, and press and hold the multifunction key for over 8 seconds. Start pairing the device again. It should work fine now with default passkey 0000
Be sure the the headset in in 'Pairing' mode. When in pairing mode, the light should be flashing red and blue or have a steady blue.
The put most headsets in pairing mode, turn headset OFF, then hold the power button until it goes into pairing mode as discribed above.
Then you can discover it with your phone or PC. Pin (pass key) should be 0000 (4 Zeros) or try 1111, 1234, 9999
Did you DROP the BTslbc3 from your old phone? If not, it may not pair with the new one. That is just a suggestion you may want to try. It may not pair with the new if it is still paried to the old. Hope this helps.