Question about Washing Machines
I've read your owners manual online and found nothing on changing the water level-I did read that there is a procedure to add an extra rinse cycle to the each washing-here is the link to the owners manual http://www.productsmanual.com/read/whirlpool-pdf-wfw9750ww01-duet-automatic-washer-owner-s-manual.html-cheers Denny
Posted on Oct 21, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The filter on your pump is probably clogged with lint and stuff. You have to remove the bottom front panel, 3 torx screws underneath. The panel will drop and come off. Drain off the excess water from the drain pipe you see. The white filter cover is right in front. Get yourself a good plastic bag to collect water. Unscrew the filter cover and twist the filter out. Clean out all the stuff and put it back in carefully. Check your pump too, comes after the filter.
Posted on Apr 08, 2009
You don't need any special tools to do this. Feel around the edge of the bellows seal until you find a spring in the groove behind the face of the seal. Using a small screwdriver, lever it over the edge of the seal, and slowly work the ring over the seal face. Peel the seal off of the mounting flange, and roll it inside the drum. Remove the front of the washer, and remove the spring on the inner part of the seal. Replace the seal, making sure that it is oriented in the same manner as the one you took off. Reassemble in the reverse order. There are a number of very good videos on YouTube. Type in "washing machine repair" and you'll find different chapters in what amounts to a series on repair.....good stuff.
Hopes this is helpful to you. Best regards, --W/D-- please feel free to rate this carefully hand crafted answer! Thanx!
Posted on Aug 18, 2009
i just had the same prob i took off the top snap cover for the bleach and saw were the water goes out and it was clogged cleaned it out and it drains great again
Posted on Nov 17, 2009
Tips for a great answer:
Sep 02, 2015 | Whirlpool duet Washing Machines
Jan 11, 2013 | Whirlpool Duet GHW9150P Front Load Washer
Oct 27, 2012 | Whirlpool Duet WFW9151YW 27" Front-Load...
Aug 30, 2011 | Whirlpool Duet GHW9150P Front Load Washer
Mar 03, 2011 | Whirlpool Duet GHW9150P Front Load Washer
May 15, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Aug 12, 2017 | Whirlpool Duet GHW9150P Front Load Washer
Nov 08, 2009 | Whirlpool Duet GHW9150P Front Load Washer
102 people viewed this question
Usually answered in minutes!