Question about Whirlpool Kitchen Ranges

2 Answers

House power tripped After power restore all the

House power tripped After power restore all the display lights are on Nothing is working... What shlould we do to reset ?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Were you able to resolve your problem? My house power tripped and then we lost power for several hours. The next day I noticed my oven wouldn't heat past 165 degrees. I've reset the breaker box and left it off and it didn't fix it. It just won't reach the preset temperature at all. Any assistance is greatly appreciated. :-)

Posted on Oct 06, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 434 Answers

You might try turning off power to it by flipping off the specific breaker that serves the unit. Leave it off for 2-3 minutes, turn it back on and see what you've got. If you have a manual, it could be there is a reset button, but I have no idea. . .

Posted on May 27, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The control panel on my oven doesn't seem to be working. I pressing COOKING MODE for 5 seconds and nothing happens. The display just blinks once in a while.


In the power panel on your house. There are two circuit breakers with their handles joined.One of these breakers has tripped internally which will stop the heating elements but not the control panel or oven light since they work on 120 volts. Reset the breaker or replace it.

Feb 02, 2016 | Bosch Ovens

1 Answer

Smart drive


Will need the tender hands of a qualified repair person.

Jul 07, 2013 | MediaFORM SmartDRIVE (CD-816T) CD-RW...

1 Answer

My e wave microwave appears to be in fine working order until the door is opened. It then trips the breaker and ceases working. Ater the house breaker is reset, the power is restored to the microwave...


You may have a short circuit on the INTERIOR LIGHT BULB circuit in your microwave.

This might explain why the breaker trips every time you open the door.

If so, you would have to unplug and disassemble the unit in order to access the wires and light bulb socket inside the case in order to troubleshoot and repair the problem.

If you are unfamiliar with safe electrical troubleshooting and repair procedures, please be extremely careful or consider hiring an electrician to do the work. There are some hazardous components inside which remain dangerous even after the unit is unplugged.

Good luck.

Apr 19, 2011 | Vacuums

1 Answer

Loaded washer and then a FH message came up and then I unplugged it. Checked it plugged it back in and no power no lights no nothing. Plug is good and checked house fuses but still no power.


Hi

Thanks for using FixYa. Error code F/H means no water was detected entering machine or Pressure switch trip not detected. If after 30 seconds the control does not detect water entering machine and then valves will be turned off and the error code will be displayed. It can also happen if the control has turned the water valves on and after 8 minutes the flow meter has detected 10.5 gallons of water passing through it, but has not detected the pressure switch trip, the valves will be turned off and the error code will flash. You'll have to Press PAUSE/CANCEL twice to clear the display. Please rate the solution if the issue is resolved or post a comment for further assistance.

Thanks
Rylee

Oct 25, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

The oven tripped the main fuse switch to the house while on and when i restored power the clock on the oven came on but nothing else works no grill, oven, fan or lights ???


you have to set the clock befire anything works .if you have done that its could be that the element has failed and the fault current has damaged any of the contacts in the circuit which can be themostat ,timer contact thermal cut out contacts. failure of the timer contacts would leave nothing working

Aug 04, 2010 | Baumatic B187 Stainless Steel Electric...

2 Answers

Trips on power up


It has a short circuit on the final steps of the outputs, maybe the common called "final transistors or power amplification IC (integrated Circuits)"are blown. You don't have the ability to resolve this problem, so take the unit to a facility authorized repair.

Dec 29, 2009 | Behringer EUROPOWER EP2500 Amplifier

1 Answer

Have model T1 032A programmable 3 way mfg 11-06 and bought in 07. Light still works manually by garage switch but no power at timer in house. Can't see a battery. Nothing shows on screen even when I push...


Open following link to identify timer and download manual:
http://waterheatertimer.org/Aube-timers.html

The reset button is small round button and can be pushed with toothpick or paper clip.
If reset doesn't restore timer, then timer is probably shot.
Also check all breakers to make sure one isn't tripped.

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Aug 28, 2009 | Aube Technologies Aube 7-Day Programmable...

1 Answer

There is no power to the unit at all circuit breaker not tripped


blown fuse-easy fix -find book-it is shown behind service panel

Nov 04, 2008 | GE JVM1651 Microwave Oven

2 Answers

Hotpoint WMA 48, tripped house rcd, no lights on and water heating noise.


need to know a little more really but here goes, if you remove the top and the drive belt is still on then it will be as straight forward as the motor brushes at fault they will need replacing as this is a common fault on these machines. hope this helps

Mar 06, 2007 | Hotpoint WMA48 Front Load Washer

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

Cindy Wells

Level 3 Expert

5058 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...