Question about Lands Phones

Open Question

Polycom error codes ec07 - Lands Phones

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ercupa190
  • 12223 Answers

SOURCE: Error code 7

Dear Sir:
The error 7 has 2 alternatives:
1) Elevation motor a) lube the gear, bar, tight the connector very well b) adjust the potentiometer. Run the software calibration for diagnose, and troubleshooting.

2) The display console problem a) adjust the reed switch see the diagram attached, clean, tight the connector very well b) tight the ribbon cable from keypad c) tight the connector from display board vs lower board.

Run the software calibration again.

sincerely. God bless you
5_3_2012_6_46_28_am.gif

Posted on May 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On Polycom 335 how do I reset voicemail for new employee


"If you need to remove the resource files from a phone at some later date-for example, you are giving the phone to a new user-instructions on how to put the phone into the factory default state can be found in 'Quick Tip 18298: Resetting and Rebooting SoundPoint IP, SoundStation IP, and Polycom VVX 1500 Phones' at http://support.polycom.com/global/documents/support/technical/products/voice/SoundPointIP_Resetting_Log_Files_QT18298.pdf "

http://supportdocs.polycom.com/PolycomService/support/global/documents/support/setup_maintenance/products/voice/spip_ssip_vvx_Admin_Guide_SIP_3_2_2_eng.pdf

Oct 06, 2014 | Polycom SoundPoint IP 320 SIP IP Phone

1 Answer

Error code 7


Dear Sir:
The error 7 has 2 alternatives:
1) Elevation motor a) lube the gear, bar, tight the connector very well b) adjust the potentiometer. Run the software calibration for diagnose, and troubleshooting.

2) The display console problem a) adjust the reed switch see the diagram attached, clean, tight the connector very well b) tight the ribbon cable from keypad c) tight the connector from display board vs lower board.

Run the software calibration again.

sincerely. God bless you
5_3_2012_6_46_28_am.gif

May 02, 2012 | Exercise & Fitness

1 Answer

I have a problem regarding my Polycom Soundpoint IP331. It doesn't boot anymore. It shows only an error which is error.cfg.


You need to reinstall all the files back onto the phone. You can get the files from the Polycom Website. You can also follow the instruction from my Polycom 501 Fixya blog to see how its done.

Jun 15, 2011 | Polycom SoundPoint IP 501 IP Phone

1 Answer

Vortex giving error code of 291


Error Code 291 is an internal hardware failure. There is no service fix for the field technician; the unit must be removed and sent back to Polycom for repair.

Greg @ VIcom - Virginia Beach, VA

May 18, 2010 | Polycom Vortex EF2280 (220012280001)

1 Answer

Error loading 0004f220429c.cfg


This means the phone cannot find its <mac>.cfg file on the boot server, and does not have one loaded in its own flash memory.
You will need to configure a boot server to host the SIP software, BootROM, and all the config files (these are included in with the SIP software).
You can download these from Polycom's product support page:
http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip330_320.html

Aug 18, 2009 | Polycom SoundPoint 330 IP Phone

1 Answer

Polycom IP 330 SIP C Will not boot up


This means the phone's SIP application has been erased. You will need to download the SIP app and BootROM from the Polycom support page, host the files on a boot server, and then point the phone to this server from the server menu so the phone will reboot and download the files.

http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip330_320.html

Dec 16, 2008 | Polycom SoundPoint 330 IP Phone

2 Answers

Polycom ip501f error, application is not present


Make sure you have the latest BootROM and SIP config files for this polycom(sip.ld, sip.cfg, etc...) on your TFTP server. If you do not have this - download from here - http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip501.html

If you do not have a TFTP server, you can download one for free.

Dec 04, 2008 | Polycom SoundPoint IP 501 IP Phone

1 Answer

I am unable to push the configuration files into polycom soundpoint ip 330 through tftpd


This means the phone's SIP application has been erased. You will need to download the SIP app and BootROM from the Polycom support page, host the files on a boot server, and then point the phone to this server from the server menu so the phone will reboot and download the files.

http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip330_320.html

Aug 28, 2008 | Polycom SoundPoint 330 IP Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...