Question about Science & Laboratory
I have autoclave Euronda E7 when switch on the unit directly error E16 appeared on the screen and i can't use the autoclave if you press any buttons no thing happen...!!!? what the solution?
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You stated having the unit unplugged in your problem description so you did do a reset already and that seems to have caused your problem. Unplugging the machine will probably not resolve your issue then. What does seem to be happening is corruption in the unit's firmware that is crashing it causing it to go into stand-by. Unfortunately I doubt there is any software on the Internet that will allow you to re-flash the machine's firmware. Unless you still have warranty available you will either have to live with it, replace the unit's main board (doubt a replacement can easily be found), or replace it with something new.
Posted on Aug 26, 2008
Tips for a great answer:
Jan 08, 2018 | Science & Laboratory
Dec 08, 2013 | Science & Laboratory
357 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: