- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check and replace the CRT base connecting Socket. It is faulty. This can be located at the CRT base card. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
try this,press manual buttons on tele as if you are changing tv chans ,if you do this thru all mem chans on tele you should come to one that changes to video input this has worked for me on other televisions.
If u think that it has some thing to do with the remote control of the TV or the DVD player then firstly u must change the picture quality of the screen from higher to lower or vice versa. If this doesn't works then try playing an audio CD and then see if it is working. If it is played on the System then there is a problen with your Television and if it is not played then the DVD player is corrupt.
Perhaps your neighbours have the same tele and the same remote......its not unheard of they may be in the direct line to your TV. Other than that I cant see that a tele can do all this by itself. Im not being cheeky here it is NOT logical?
probably just a burned micro fuse on the board
If still under warranty or if you have no electronic repair experience you should take the set back to the shop or to a repair person. Some of the solutions described below can be dangerous, TV's are very hazardous to service. Even when plugged out, TV's can store very high voltages.