Question about Jenn-Air JDR8895AAS Dual Fuel (Electric and Gas) Kitchen Range
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Where do all orifices go on anything gas? Right there where the burner meets gas valve. The air shutter sits right in front of the orifice for proper air to gas ratio right.Go out and look at yer gas grill. Where the burners meet the gas valve ye shall find the orifice.
Posted on Mar 14, 2009
I have one supplier and possibly another. Until you talk with them I am not sure about the price. Click Here=> AmericanHVACparts.com I don't think too many people like to sell the conversion kits because it requires a little knowledge and a lot of know how and caution. Call them if you have a problem there please let me know, Thanks Sea Breeze
Posted on Dec 16, 2009
This is the solution to convert from LP back to natural gas that I posted as a comment on this thread:
After much work and little help from Jenn-Air or Whirlpool, I found a satisfactory solution. As many of you may have found out, Whirlpool does not sell the natural gas orifices to the JDR8895AAS separately as they do the LP conversion orifices. Instead, they recommend that you buy all 5 orifice holders that include the individual orifices. This would run about $120-150 depending on where you shop. If you want to take this route, the Whirlpool parts you need are:
Fortunately, because natural gas is denser than LP, the LP orifices can be bored out for a conversion back to natural gas. After a lot of homework I was able to find someone with the natural gas orifices for this stove that let me take them out to measure them. For some crazy reason, Whirlpool does not have this information:
Find a machine shop or a good appliance repair shop that has a wire gauging bit set. The natural gas orifice hole sizes are as follows:
Left front burner (16K BTU): 48Left rear burner (9.2K BTU): 54Center burner (5K BTU): 58Right front burner (12.5K BTU): 52Right rear burnger (5K BTU): 58
It cost me $25 to have these resized after I found the correct hole size.
Finally, to complete the conversion back to natural gas, you must flip the plastic screw-shaped piece by unscrewing the hex nut on the regulator at the back of the stove.
Hope this helps, because it took me a while to figure it out.
Posted on Mar 02, 2012
Tips for a great answer:
Nov 25, 2013 | Magic Chef CYG3004AWW Gas Dryer
Jan 18, 2011 | Magic Chef 31100 Gas Kitchen Range
May 13, 2010 | Magic Chef 31000 Gas Kitchen Range
Oct 16, 2008 | Magic Chef Kitchen Ranges
May 23, 2008 | Magic Chef Kitchen Ranges
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: