Question about Televison & Video

Open Question

My Hisense LED LCD TV model 40K366W picture is distorted. Not a signal issue. Signal is fine on other TV's in house. Appears as if the blue and green signals are not in sync. Imagine is bouncing vertically, with one color fixed or stable and the other is bouncing, about 4 inches below the fixed color.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 37" Polaroid LCD TV No signal appears when select channel

I was having same problem, and think I got lucky and found fix.

Try unplugging the TV and waiting 30 seconds, then plug back in.

You will likely get blue screen with "No Signal".

Go to Menu, then scroll down to "Setup". Select "Factory Reset" then hit "Yes."

This did it for me. Wish you all luck.

Posted on Dec 03, 2008

ThaMp3Doctor
  • 8596 Answers

SOURCE: rca 46 inch lcd tv, no sound

Go into the menu and change the HDMI Audio settings - the manual will give you a breakdown on this. HDMI is a little glitchy - if you were using red/gree/blue cables before switching to HDMI, you might want to consider going back to them - just an opinion.

Posted on Jan 03, 2009

  • 1 Answer

SOURCE: 42 inch LCD Vizio. "no signal"

Just hold down the input button on the right side of the tv. This is the bottom one. So,
With the tv off,
press and hold the bottom button (input)
when the tv turns on, and you see the input menu
release and press the button to put the tv into a mode that works!
Thanks

Posted on Jan 11, 2009

tvservice306
  • 458 Answers

SOURCE: Samsung LCD TV ''Weak or No Signal''

try swicth cable box for testing....if sam problem..need replaced tv main board

Posted on Jan 01, 2010

Testimonial: "Thanks for the info! Very helpful!"

  • 10 Answers

SOURCE: Philips LCD TV "47, model PFL 8404H/12, NO SIGNAL on all 4 HDMI

This is quite tricky as it was working until last night and suddenly stopped receiving signals. What can happen wrong?
Do you have any other Player or other HDMI cables to try out. Sometimes the cables would be damaged or PC may fail to detect the HDMI.

Try this out from Philips helpdesk where there is new SW and FAQs are available.
http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?ctn=42PFL8404H/12&slg=en&scy=CZ

Let me know if you are not able to upgrade the FW (if you do not get the support on ugprading)




Posted on May 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i back up my pictures and software on my tablet because its stuck on the boot screen


If it has been struck at boot screen, you can't. Contact any technician. Probably it might not be impossible. Electro help

Nov 27, 2014 | Hisense 40K366W 40" 1080p Wi-Fi LED TV...

1 Answer

How can I connect my hisense tv to wifi? it wont show my wifi name in security mode. when I scan it says no ap?


Either your router is not set up to broadcast the SSID(network name),the router is too far away from the TV, or there is a problem with the wireless on the TV.

If you can see the SSID from the same location with your phone/tablet/etc then it is probably an issue with the TV. You can also check for a firmware update for both the TV and the router.

Nov 16, 2014 | Hisense 40K366W 40" 1080p Wi-Fi LED TV...

1 Answer

Blue Screen appears


A solid blue screen usually means no signal (set not seeing signal) look to see if same on all inputs. If you have a picture but the screen is blue that is a different issue.


Answer is based on model number listed here, let me know
as much as possible.

Dec 16, 2012 | Hitachi 50C10 LCD TV

1 Answer

42PFL3603D/F7 PHILIPS HDTV


Your problem is a combination of calibration of your TV and signal strength of your Dish system. Proper color calibration will remove the motion blur and SD issues in the average home. If you continue to have poor quality on your dish system after calibration, then Dish needs to check your signal strengths again. (AND fix it.)

Nov 28, 2008 | Philips 42PFL3603D 42 in. LCD TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5103 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...