Question about Computers & Internet
I do have a box.net account. And defined the settings with id and password. But still the remote drive is not connected.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: set top box and remote control
I have the same problem. When I move the 8300HDC away from the TV, or power off the TV, the remote responds. There seems to be some kind of RF interference, which makes no sense since the TV shouldn't emit RF, and the the box should be using IR only for remote input. My TV is a 46" LCD Samsung. Try turning off the TV and see if the 8300HDC responds to powering on and off with the remote.
Posted on Nov 18, 2007
SOURCE: dish network
Codes for Apex are 595, 618, 743, 744, 005, 006, 019, 020, 120, 745, and 757.
Codes for Sony tv are 500, 514, 578, 640, 670, 690, and 758.
If these dont work here is what is called a power scan. It will go through all the codes in the remote and find the right code for your tv.
1)hold down tv button next to sat button in top left corner
2) when all buttons illuminate press 500 into remote
3)press pound sign
4)Hello, please help..
5)hold town tv button again.
6)when all buttons illuminate press big red power button
7)press up arrow once a second until tv shuts off
8)press # pound sign
9)try to turn tv back on w/ big red power button
10)if tv doesnt turn back on try again from step 2 but use down arrow instead
To set up caller id you have to enable it on the receiver. Press menu 6-1-2, highlight enable and press select. Highlight done and press select. Press 0 three times. Try calling yourself with a cell phone to see if it works, if not, repost on this thread.
Posted on Aug 20, 2008
I had the same exact issue. I was using dyndns to connect, but i found out that when you login in the host, dont put your local ip address of the dvr, but instead put the internet ip address of your network. so instead of 192.168.0.5 for your local put the 18.104.22.168 for the internet address. That fixed my issue. Hope that works for you. Just make sure your username and password is right and the port is set up correct in your router to forward to the local ip of the dvr.
Posted on Mar 27, 2010
Tips for a great answer:
Jul 06, 2014 | RCA RCU600M Universal Remote Control TV,...
Jun 24, 2011 | SanDisk 1GB microSD Memory Card
Apr 17, 2011 | TallyGenicom TallyT2240 Dot Matrix...
Oct 09, 2010 | TallyGenicom TallyT2240 Dot Matrix...
Oct 08, 2010 | TallyGenicom 2265+ Matrix Printer
Oct 08, 2010 | TallyGenicom TallyT2240 Dot Matrix...
Feb 15, 2010 | Yahoo Mail
Jan 27, 2010 | Logitech HARMONY 659 Remote Control
27 people viewed this question
Usually answered in minutes!