Question about Garden
If it was not run, or was shut down before it seized, drain the fuel
refill with 2 cycle mix (double oil if the saw had been run).
Start it and run under light load till empty.
if it seized a total rebuild will be necessary.
Posted on Oct 21, 2013
Your chainsaw is probably good for the junk heap if it is ceased or locked up.
If you can still pull it thru, drain out all the non-oil gas and refill with gas and oil mixed to the normal mixing for your chainsaw.
Give it a crank and hopefully all will be good to go for a while
Posted on Oct 21, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Assuming it's prior to 2007 model year:
User manuals, middle of page:
Posted on Jul 16, 2009
There ARE two holes in the tank. One samll and another larger. One is on the left side and the other is on the right. Look carefully and you'll find them. As far as connections of the fuel lines:
The line from the fuel filter in the tank goes directly through the small hole in the tank to the top nipple on the carb thus giving the carb a constant supply of fuel when running. The primer bulb is used only for "priming" and does not play a part in the fuel flow after that function. The bottom nipple on then carb then goes back to the nipple on the primer bulb which is clearly marked "Carb". The above connections are made with the smaller diameter tubing. From the primer bulb, marked "Tank", the larger diameter tubing is routed to the large hole in the tank. The tubing goes into the tank only 1/2 to 3/4 inch. As far as getting the tubing through the holes in the tank, cutting the tubing at a slant. But no matter what you do it is still a witch. Be patient, use some Vaseline and avoid the temptation to get out the drill and **** the hole to a larger size.
Posted on Sep 22, 2009
Tips for a great answer:
Sep 09, 2011 | Poulan Pro 42CC 2 Cycle Chainsaw, 18"
Jun 15, 2011 | Poulan P3314 14" Gas Chain Saw 2.0 Cuin...
Dec 18, 2010 | Poulan Pro 42CC 2 Cycle Chainsaw, 18"
Oct 03, 2010 | Poulan Garden
Sep 25, 2010 | Poulan Pro Chain Saw 46cc 20"
Jul 24, 2010 | Poulan Pro 42CC 2 Cycle Chainsaw, 18"
Feb 02, 2010 | Poulan Pro 42CC 2 Cycle Chainsaw, 18"
Jan 07, 2010 | Poulan Pro 42CC 2 Cycle Chainsaw, 18"
Dec 15, 2009 | Poulan Pro 42CC 2 Cycle Chainsaw, 18"
Aug 22, 2017 | Cub Cadet Garden
91 people viewed this question
Usually answered in minutes!