Question about Panasonic TH-42PX60U Television
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Power board short and bad capacitor blown, capacitors usually pop because of shorted or open rectifiers and linear devices that warp inside. This happens due to excessive heat exposure from the current draw. Bad diodes and FET's are usually the root cause as to why capacitors bulge then eventually pop. This means the the x-y sustain boards are not getting their supply voltage resulting a no picture....
The red light flashes an error code for a technician to read, the tv is in protection mode to prevent further damage. Get it serviced at your local repair center or take it back if its under warranty.....
Posted on Nov 04, 2009
Your power supply board is dead, u know basic electronics’ and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
hope this helps...
Posted on Jul 02, 2010
Sounds like it could be a power supply problem I would check power supply for bad capacitors. look for bulging on the top of the caps and replace with same values.
Posted on Oct 07, 2010
Tips for a great answer:
Nov 18, 2016 | Sylvania Televison & Video
Apr 10, 2015 | Sylvania Televison & Video
Jan 20, 2013 | Sylvania Televison & Video
Jul 22, 2011 | Sylvania LC320SSX 32 in. LCD TV
May 13, 2010 | Sylvania LC320SS9 32 in. LCD TV
Feb 12, 2010 | Sylvania LC320SS8 32 in. LCD Television
I recently repaired this exact TV that sounds like the exact problem. First you can take the back off and unplug everything from the Inverter board. Then try to power on the TV and if the green light comes on, and stays on, then you know the problem is in the inverter board. My problem was in the inverter and I found Q1500 (N Channel MOSFET) shorted Gate, Drain, and Source together. It's a simple part to replace but a difficult part to find. If you need help finding the part, I can direct you to the place I got mine for $3 and $8 shipping. Just for safe measure I also replaced Q1550 that is the same exact part on that board.
Feb 05, 2010 | Sylvania LC320SLX 32 in. LCD TV
Jan 16, 2010 | Proscan 32LB30H LCD TV
Jun 15, 2008 | RCA D52W19 52" Rear Projection Television
Apr 28, 2014 | Panasonic TH-42PX60U Television
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: