Question about Maytag Washing Machines
Clean and check all your wiring connections-you may have corrosion or loose wiring give weak power to motor,controller,or sensors-cheers Denny
Posted on Oct 20, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If it is leaking from the waste pump area it may be blocked by a small piece of clothing like a sock or something similar! This will also cause it to take too long to complete a cycle. Remove the rubber hose onto the waste pump and check inside the hose and the pump, make sure the pump spins freely and that nothing is stuck in the hose pipes leading to the pump
Posted on Sep 13, 2007
Sounds like the 'Wash water' is not pumping out fully,You need to drain the water by lowering the empty hose into a bowl & check the pump for a blockage ( if the pump is an 'electric one' check that it is working). TURN POWER OFF FIRST
Posted on Oct 26, 2007
very possible if squeaks in agitation top springs that hold tub needs greased under spring & plastic shield under spring. had same problem on big front loaders whirlpool
Posted on Nov 14, 2008
Tips for a great answer:
Dec 05, 2012 | Maytag Legacy Series Top Load Washer
Aug 16, 2017 | Maytag Legacy Series Top Load Washer
May 04, 2010 | Maytag Legacy Top Load Washer
Jun 07, 2009 | Maytag Legacy Series Top Load Washer
May 24, 2009 | Maytag Legacy Series Top Load Washer
May 05, 2009 | Maytag Neptune FAV6800AW Top Load Washer
May 05, 2008 | Maytag Legacy Series Top Load Washer
23 people viewed this question
Usually answered in minutes!