Question about Televison & Video
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: code for polaroid tv
I just got a new directv receiver...dvr....the codes for polaroid were not listed on the unit but were included in the booklet that came with it. They are as follows....10765,10865,11262,11276,11314,11316,
These were all listed for Polaroid. Hope this helps.
Posted on Jan 12, 2008
Have you tried the searching for your code option on the 15-2147?
for example, turn on your Emerson LC200EM8( press the appropriate key on your remote, if this is a TV.#1.press the tv key on your remote)..#2.Press and hold the little 'p' key till the LED lite,on the remote, blinks twice..#3..then enter 9 9 1.(the led should blink twice).#4.Aim and..Press the Power off on the remote....(the remote will start sending IR codes from its library to the selected device, starting with the most popular.)#5..If the TV responds go to step 6..if not, press the CH+ button, until it does...step #6 when device responds, to lock in the code, press 'p' once, the LED blinks twice.
Once you have your number locked in,,,you can get the remote to tell you what sequence the code is in by #1Press the appropriate key on the remote.(i.e, TV press the TV key ....Dvd player or VCR, then press that key). (Note: make sure you are aiming the remote at the device so the IR(infrared) enters the device.) Step #2 Press and hold the 'p' key(upper right corner of controller) until LED blinks twice, then release....Step #3 enter the code 9 9 0 ..the LED lite blinks twice. ..Step#4 to get the first number of the code press th e number 1 on the controller...the LED will blink the once for 1 //twice for 2...three times for3...etc...write down how many times the LED blinks(if it doesnt blink the first number of the code is 0) Repeat step #4 to get the remaining numbers, i.e. for the second mumber of the code enter 2...third number enter 3...till you have all four numbers.( when done you can press a different device key to get you off... then press the right device key for your device to operate it remotely. Hope this helps
Posted on Oct 12, 2008
I don't know for sure, but this might help. I asked a question myself then managed to find my own instruction sheet. My question was about the 'auto find' function where the remote tries all codes until you find one that works and store it. Hope it helps!
This is it's instructions in case they help anyone else. By the way where it says 'a second or even a third time' be prepeared for many more attempts than 3!!
First power on the equipment to be controlled. Press the SET button and don't release, then press the equipment control button (such as tv / vcr etc). The red light will be on. Release the SET button then press the SET button again, the red light will be flashing. Press the POWER button, the remote controller will transmit a signal to power off the equipment. If the equipment cannot be powered off for the first operation, try a second or even third time until the equipment is powered off. When the equipment is powered off, the code will correspond with the equipment. Press the button for the equipment (such as TV) to save the setting.
Posted on Feb 08, 2009
Just noticed your post when searching same problem. Legend useless.. I have lost an RC for one of the LHD3's I have, asked them if they could supply a new one at a price.No!
However the Logitech Harmony universal remote control allegedly will work, but I suspect this is another one of the con jobs that Google, eBay etc propagate..they say their paid advertiser can supply something but it will turn out to be false. Too late once you have paid $50+ and find there is no code or you have to try and steo through 10,000 possible four digit code to find the one that works.. and yes i found several codes on a URC last night even that turns the LHD3 on/ off, but not even will step the channels. Telict
Posted on May 04, 2010
Tips for a great answer:
Dec 01, 2016 | Televison & Video
Dec 09, 2015 | iLO Televison & Video
Jan 22, 2015 | Universal Televison & Video
Apr 18, 2014 | One For All URC-4021 Remote Control
Aug 23, 2013 | Televison & Video
Jan 29, 2013 | Televison & Video
Jan 04, 2012 | Televison & Video
May 27, 2008 | Toshiba 27A34 27" TV
29 people viewed this question
Usually answered in minutes!