Question about Whirlpool Dryers

2 Answers

Water logged in the dryer of whirlpool washing machine, model- i 72 s :-we have purchased whirlpool i 72 s washing machine 10 months back., initially it was working properly but from last 3 weeks the dryer is not working at all..., water is logged in the dryer and it is making horrible sound. Plzzz help!!!!!

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Whirlpool Master
  • 2,118 Answers

If you find water in the dryer and vent line you need to have the dryer and vent line cleaned out,and this should be done once a year.all a dryer does is move air,if the hot air can't be blown to the out side the mosisture from the clothes will get stuck in the lint that's been building up,usually you'll blow the thermal fuse or high linit t-stat when this happens.also if you say it's making a bad sound the blower wheel could be broke.remove the vent line from the back of dryer,start it and see if any air is blowing out ,if you send the model number i can tell you how to take the dryer apart.but you need to check the blower wheel,if that's ok you have to unplug the dryer,pull out the lint filter,remove the duct the lint filter slides into,clean out the inside cabinet,then blow out the vent line if it's long,also go outside,if there's a cage or anything blocking the outside duct remove it and don'r put it back,all it will do is collect lint.

Posted on Oct 20, 2013

Testimonial: "thank u"

  • Sal DeAngelo Oct 21, 2013

    glad i could help and good job repairing your dryer.you need ant help with any other appliance let me know and hopefully i can help you.

  • Vimmi Oct 31, 2013

    yes ofcorse, its so nice of u.. thnks again

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Check the drain pump it might be that something small is blocking it from draining the water.

Posted on Oct 20, 2013

Testimonial: "yes it might b 1 of d reason.., i hav tried to check. thanx"

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: My Maytag dryer makes an aweful noise.

Typical parts that wear out and get noisy on that model are the two drum rollers (part # 12001541), the front drum glides #306508, the idler pulley Y303705 and the blower wheel 303836. None of these parts are very expensive, but to do all of them would definitely add up to the point that you might want to think about whether or not you want to keep the machine in operation especially after 10 years of good service.

Posted on Jan 04, 2008

SOURCE: dryer model BOSCH WTA 2000,

<a href="http://www.powertools-brands.blogspot.com/">Power Tools Brands</a>

Posted on Oct 27, 2008

  • 1 Answer

SOURCE: Maytag Dryer, Model DE210

Dryer just buzzes when i push start

Posted on Nov 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I purchased a Whirlpool gas water heater model ND40T62-403 from Lowes in July 2013. The pilot light has gone out on 3 occasions since Thanksgiving. It is out right now. I have everything unplugged and...


Go back to Lowe's with all receipts including the your purchase receipt, the plumber's bills and whatever records you have while speaking to the Whirlpool technician, and raise hell. What water heater is unsuited for your home?? Is Whirlpool crazy? Lowe's would not sell you an inappropriate water heater. You should have done this 3 months ago.

Jan 25, 2014 | Washing Machines

1 Answer

What dose a FL code mean on whirlpool cabrio platinum


I will try and help for some reason Whirlpool likes to flip letters around which differ from the service manual FL would be an LF long fill or is it a F1 the model doesn't show in the Whirlpool data base nor parts suppliers I suspect wtw6600sb1 does the machine from initial start fill correctly then wash if so we can eliminate the pressure switch and hose after wash cycle unit should drain then fill with rinse water if the inlet valve does not let water into the machine to satisfy the pressure switch the control times out and flashes a long fill code this unit has a log valve system possible you have a bad inlet valve on the bank of valve or a bad control not outputing voltage to the valve, hope this points you in the right direction

Jan 14, 2014 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Overflowing Washing Machine, water does not stop filling, overflows to floor. This is a Whirlpool Thin Twin Stackable


sounds like you have a bad water level pressure switch part 3362987
http://www.searspartsdirect.com/partsdirect/part-model/Whirlpool-Parts/Washer-dryer-combo-Parts/Model-LTE5243DQ6/1198/0152000/W0604125/00001?blt=06&prst=&shdMod=
go her part number 10 in diagram or there could be something in the hose,the hose could have fallen off or could have a hole in it,i can't find a video with a stack machine but this explains your problem
http://www.youtube.com/watch?v=jzKBUI5D0Vs

Mar 30, 2013 | Whirlpool LTE5243DQ Combination...

1 Answer

Dear sir, We want to buy 02 nos of whirlpool make 8.5 kg washer 02 nos and one nos of dryer. We need the same for our factry on contineous operation so we want the best...


Hi and welcome to FixYa, I am Kelly.

I understand you want a whirlpool washer. What are you washing? It does make a difference on what would be recommended. The other question is does it have to be a front load machine or is a top loading washer ok?

Right off the top of my head for an 8.5 kg washer I would recommend the top loading MAT Series by Maytag (owned by Whirpool) These manual timer machines can take a beating and over loading only causes belt wear that is inexpensive and easy to replace. The only drawback is that the top loading machines use more water per cycle than a front loading machine. My thought is this... water is cheap... smaller front loading commercial machines used in continuous manner end up costing you more in repairs than you would pay for the water.

Product info: http://www.maytagcommerciallaundry.com/on_premiseslaundry/top_load_washers/commercial_energy_advantage__8482__top_load_washer_mat15mnaww.pro?scr=category

Once you see the linked pages select "on premises lanudry"

What I will tell you about commercial laundry machines is this. Keep the controls simple such as the MAT series. Maintenance parts are available on line and your down time will be minimal. The Maytags have the best warranty also.

As for the dryer Gas or electric? I am going to assume electric since you said "Factory"
For this I would recommend the MDE17 series Dryers, The dryers are 4 roller drum type dryers so the weight is carried equally front and rear of the drum so that the drum seals have a very long life.

I have been a Maytag repairman since 1970 and started in a family owned business. These recommendations are from years of experience. You may pay more up front on the initial purchase but over the years the continued in service time and minimal maintenance required make these units extremely cost effective. If I were to start my own business with 8.5 Kg per cycle washing requirements The MAT Washers and MDE Dryers Maytags are exactly what I would use.

Remember Maytag was purchased by Whirlpool years ago.
All Maytag parts can be obtained through Whirlpool.
I do wish you the best, Thanks for choosing FixYa,
Kelly



Dec 12, 2010 | Whirlpool Washing Machines

1 Answer

Error "LE" on the display after initial water load


just perform the tub cleaning operation as advised. nothing else. getting soiled

Mar 18, 2010 | Washing Machines

1 Answer

Kenmore model # 110.244222300, Won't automatically complete wash


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.#######) and you'll see a list of major sub-components with diagrams and parts.

Following is a Whirlpool / Kenmore service manual for top load, direct drive washers.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf

Initial thoughts are that the Timer is worn / broken.

Here is a description of how to gain access to the console on these washers where you may be able to test the timer. (See the Whirlpool service manual for testing)

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=131



Jan 19, 2010 | Kenmore Washing Machines

1 Answer

Water valve P/N 8577407 failed after 13 months


If you ever buy anything from Sears, always keep a warranty,we do and had to use it alot.

Jun 28, 2017 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Washer will not drain has a code F72


Good you ran diagnostics, F 72 shows at c7 when the basket settles after draining the water out. F 72 is a basket re- engagement failure, does your machine go off balance easy? I need to know is the machine was purchased at Sears and the serial number. If so I will get a special phone number for recalls. I hope it is a Sears machine, we see if the hot line can schedule a tech to service the machine. What the recall line will need after confirmation of a Sears purchase is you name and phone number plus model and serial number of machine. Now they will also need the part numbers to order. When these parts are ordered they will ups them to you which at that point you call back so recall can get a tech out to repair the cabrio.
motor control unit part # W10201186
Washplate part # W10077050

Recall number for Sears machines only 1-800-659-7026
I appreciate the chance to help you today, I had a machine like yours today and yesterday with same issue:)

Aug 11, 2008 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Whirlpool front loading washing machine leaking


you will have to be nice to it as it will come out and with some fairy up liquid you can put it back so easy

Jan 02, 2008 | Hotpoint Aquarius WD63 Front Load...

Not finding what you are looking for?
Dryers Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...