Question about Dryers

1 Answer

Beko tumble dryer drvt61w

Filter got clogged, now no heat. cleaned filter, but still no heat. im not sure if there is a reset button on this model. please help

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 40 Answers

If the filter got clogged it allows also to get the debris to get into or on other things. If possible turn the dryer around or lay it down to get access to the interior, and check of the thermocouple is debris free.
The Thermocouple can also be defective, Remove the old one and go to a hardware store to find an identical one. (Same length and type). There should be a reset button on newer models, which is usually accessible thru small door fastened with a screw.
Depending on your model, there is a automatic lighting button, others must be lighted with a match. Read the directions how long to hold down the button until the light stays on. A defective Thermocouple will not keep the pilot light on.

Posted on Oct 20, 2013


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1462 Answers

SOURCE: The tumble dryer appears to

check the lint filter and check venting clear

Posted on Nov 04, 2008

  • 3 Answers

SOURCE: hi the my filter light keeps flashing and iv got no heat!

My guess is that the heater element has gone out. There could also be a lint clog in the exhaust takes air out through the filter...across the heater element....and back through the tumbler to heat the clothes. This is usually what causes heat elements to go out is the excess lint that gets on them and causes them to overheat and burn out!

Posted on Dec 14, 2008

  • 2920 Answers

SOURCE: My tumble dryer is spinning but no heat.

it sounds like either your heating element went out or your limit switches are bad

Posted on Jan 14, 2009

  • 691 Answers

SOURCE: i have a beko DRCS68W tumble dryer but its not

you have to call service centre if under warranty or you'll invalidate it if you have a go. it will be the element or a heat sensor/switch most likely.

Posted on Jan 16, 2010

  • 45 Answers

SOURCE: i have a beko tumble dryer drc68w it's spinning

It is the heating element easy to replace.

Posted on Apr 28, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Take your pick :>)

  • Beko DRCT70W Tumble Dryer Spares ' eSpares Beko DRCT70W Tumble Dryer Spares. 11 to 20 of 110 items. 1; 2; 3; ... Genuine Beko spare part for select tumble dryers More information . In Stock . Stock Number ...
  • Freestanding 7kg Condenser Tumble Dryer DRCT70 ' Beko UK
    • 8.9/10
    • 16 RATINGS
    Freestanding 7kg Condenser Tumble Dryer DRCT70. Toggle navigation. ... Beko freestanding products are guaranteed against the cost of ... please visit our spare parts ...
  • Beko DRCT70W Tumble Dryer Spares ' BuySpares Buy your Beko DRCT70W Tumble Dryer Spares at BuySpares ... Beko DRCT70W Vent Kit Condenser Box (2m / 4" Hose) BuySpares Approved part. Suitable for: Beko DRCT70W.
  • Beko DRCT70W Tumble Dryer Spares Buy Genuine Beko Tumble Dryer Spares with confidence at 4Beko ... Beko DRCT70W. If your tumble dryer is showing that the tank is full but it is infact empty, ...
  • Beko DRCT70W Tumble Dryer Parts ' Partmaster Get the Beko Tumble Dryer parts you need at Partmaster. Our Beko Tumble Dryer parts range is available for delivery worldwide and for UK customers there is the option ...
  • Beko DRCS76W Condenser Tumble Dryer - Parts/spares ' eBay Beko DRCS76W Condenser Tumble Dryer - Parts/spares 0 ... BEKO Tumble Dryer DRCS68W DRCS76W DRCT70W DRVS62W DRVS73W ... Beko Condenser Tumble Dryer ...
  • Beko DRCT70W Condenser Process Fan Assy. ' Buy Beko spares for your cooker, dishwasher, fridge, freezer, tumble dryer and washing machine. Authorised Beko Dealer & Next Day Delivery available
  • BEKO DRCT70W MANUAL - time dryer beko pdf '' download beko drct70w tumble dryer spares espares pdf ' ... how to mend it com beko condenser dryer drct70w free pdf '' download beko drcs68s
  • beko tumble dryer spares > Search > beko tumble dryer spares beko tumble dryer spares. ... Universal White Knight Beko Tumble Dryer Indoor Condenser Vent Kit Box With Hose. by Lazer Electrics. £6.22. More ...
  • Beko DRCT70W Tumble Dryer Spares Buy Genuine Beko Tumble Dryer Spares with confidence at 4Beko - Beko Approved Dealer and Next Day Delivery available!
  • wa+cwowlplelaaaaaasuvork5cyii=
  • Jul 21, 2016 | Dryers

    1 Answer

    Is there a reset button for beko tumble dryer dsc64s

    unplug it for a few minutes. is it running just no heat? if so the element or thermostat is bad

    Jan 03, 2015 | Dryers

    1 Answer

    Hello all i have a beko DRVS 62W tumble has recently stopped producing heat but still do i fix this please?

    You are asking a subject which can be dangerous, since there is a gas chamber and gas involved. First check that no one has turned off the gas ballcock valve which allows gas to flow to the dryer. And that your main Home Heater or stove is working. Once you have established that, depending on model there should be an automatic ignition which lights the pilot. I'm not familiar with your model, but most dryers have a thermocouple which keeps the pilot lit. The auto reset should be near the pilot device. If you could look into Dryer by removing the access door, or sight glass (if any) you should be a pilot light or an activation of the light once the dryer request heat. As said I don't know your model, but look for a thermocouple, if you don't know what a thermocouple is, go to a Home Hardware or Appliance Repair Store and request a thermocouple. You are under no obligation to buy simple by becoming familiar. The problem with giving advice with gas appliances is that other items can cause the safety to be tripped. A crack in combustion chamber, a loose screw which changed the gas to air ration, the venting of NOX requirements. It will take some thought and knowledge, and physically seeing the devices, it could be just a wire which fell off the control valve. Ideally when it comes to gas you not only need the right tools, such as water & soap (which blows air bubbles the kids use) to check for leaks, but small wrenches, and perhaps a cleaning of the orifices. A stripped telephone wire works the best. Trace the wires from the area next to the pilot to the other end, the reset button should not be far away.

    May 10, 2014 | Beko Washing Machines

    2 Answers

    My beko tumble dryer is not heating up

    Elements is generally behind the back panel, may not be an element fault but a tripped stat. If you're lucky the stat will be a self resetting one and not have to be replaced just reset. Always isolate from mains before removing any covers etc.

    Apr 12, 2013 | Bosch Neff Beko Dryer 263297

    1 Answer

    Beko tumble dryer will not heat

    You either have a defective heating element, thermal cut-off or a fuse.

    May 03, 2012 | Dryers

    1 Answer

    I need to clean my filter on my beko tumble dryer!

    I usually just stick the shower on it to clean out all the bits of fluff that gets gathered in there, but remember to give the inside of that hatch u brought it out of with some kitchen towel before u put the condenser filter back in.

    Feb 23, 2010 | Dryers

    9 Answers

    Beko tumble dryer not drying. drum goes round but it doesn't get hot. Model DRCS68

    go into service mode and reset

    to do this move to delicates turn on dryer and keep
    pressed down cancel button for about ten seconds release
    then all lights should flash when you press cancel again machine will go through test mode , then just turn machine off
    it is now reset, this worked for min a drcs68w

    Apr 23, 2008 | Dryers

    Not finding what you are looking for?
    Dryers Logo

    Related Topics:

    109 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dryers Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8220 Answers


    Level 3 Expert

    76109 Answers

    Brad Brown

    Level 3 Expert

    15639 Answers

    Are you a Dryer Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides