Question about Computers & Internet

2 Answers

Soltek SL-85MIR3-L motherboard, DDR PC3200 Incompatible

Looking for the latest available BIOS for motherboard. 1GB PC3200 DDR memory is seen as 32MB. BIOS is late 2003 vintage, and hope later bios will fix incompatibility.

Posted by on


2 Answers

The motherboard has 2 DDR slots; each that can handle 1GB 333MHz. Currently have 512MB 333MHz in single slot. Problem I see is that the PC3200 DDR is 400MHz and the interface Intelchipset 845 on the motherboard is rated up to 333MHz. I hope that Soltek addressed this up before pulling stakes. Have seen a BIOS Nov 2004 version but all the download site links have been muted.

Posted on Sep 27, 2007

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

An old pc might max out at 32 mb. If it maxes out it won't matter how much you put in it will not recognize it. Try

Posted on Sep 27, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Upgrade PCChips M925

According to PCChips, the maximum CPU & memory supported for all three is the Intel P4 Northwood (HT) 3.06 GHz 512K,533FSB,Socket 478 and 2GB (2 x 1GB) DDR 266.

Be sure you have the latest BIOS version for your motherbaord.

M925ALU (V7.3) must have BIOS : 030703s
M925G (V8.0) and M925G (V9.1b) must have BIOS : 050510s

Hope this helps you out.

Jan 09, 2010 | PC Chips (M925G) Motherboard

1 Answer

I just want to know if my current motherboard can

Even without any way to check the specs of your motherboard with the current information, the board will most likely have at least 2 slots available for additional memory (i am assuming by memory you mean RAM), and will support DDR, PC-3200. If you have two slots, then you're looking at a limit of 2Gb (2x1GB PC3200) because DDR modules don't get any bigger than 1Gb as far as i've seen. If you have 4 slots, then a total of 4Gb.

Jun 12, 2009 | AMD Sempron 2800+, 1.6 GHz Processor

1 Answer

Athlon XP support on Soltek Sl-75KV+ mobo, latest bios

Note that SOLTEK has gone bankrupt.
Their "support" site ( is now owned by a "domain-squatter". So, there no longer is any information online about CPU-support for SOLTEK motherboards.

May 16, 2009 | Computers & Internet

1 Answer

Latest bios update and drivers for Soltek SL-85DR3-C rev:A3 silver PCB

SOLTEK has gone bankrupt.
Their web-site is "down".
So, there is *NO* "support" available from SOLTEK.

I am not a lawyer, but since DRIVER GUIDE is offering a service for a fee, it probably is legal for them to charge a fee.

Jan 11, 2009 | Soltek SL-85DRC Motherboard

2 Answers

Try to install 2gb ddr memory on MS-6741 motherboard

pls check you motherboard manual if it accept that kind of memory because some board cannot accept.

Jan 08, 2009 | MSI K8MM-ILSR Motherboard

1 Answer

Sl-75frv memorys

Dear Sir,

You can install upto 3 GB RAM. i.e. 1GB PC3200 DIMM RAM in each slot.

Please go to BIOS settings & load the defaults. / check following. BIOS settings.
DIMM clock & timing is auto/ detected by SPD (Serial Presence Detect)

Possibly the 1GB RAM you are trying to install does not have SPD / is faulty. Try with a new / working 1 GB RAM.

Hope this helps you friend...

Jul 10, 2008 | Soltek SL-75FRV Motherboard

1 Answer

Its about the memory card

The board supports upto 4 GB RAM. PC3200 RAM is supported.

1. Reset CMOS settings by CMOS jumper.

2. Try updating BIOS of your motherboard from :

Best of Luck,

Feb 13, 2008 | ASUS P5GL-MX Motherboard

2 Answers

Soltek SL-86SPE-L and 512MB 400MHz memory cards

If I could find your manual, I would bet that your memory should be CL2 or a max of CL2.5 which is the core voltage of the memory.
A lot of places do not show the CAS or CL voltage, rather they make you look for it. Thats just wrong.

Jan 16, 2008 | Soltek SL-86SPE2 Motherboard

2 Answers

Painkiller video game Crashes during Swamp Scene

Have you tried reinstalling the game, and using the latest video drivers available for your graphics card?

Jul 15, 2007 | Soltek SL-75FRN2-L Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides