Question about Canon EOS Rebel XS 35mm SLR Camera

1 Answer

Pictures didnt develop

I took a whole roll of film and only 2 turned out. all the others looked the exact same with a blur spot in each frame

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Canon Expert
  • 225 Answers

Hi Steph Johnson,
Numerous things could be the issue. 1, dirty lens, clean the front and back element, 2. The camera focus is not working properly not focusing on the correct spot. So, are you manual focusing or auto focusing? If it is auto then there could be an issue with that. If your are manual focusing are you sure your diopter setting is correct for your eyes, if not then it may appear correct in the viewfinder, yet be off focus.

Do you have a way to check the lens on a DSLR? If so you can try that lens on the DSLR seeing if there is an error with the lens or if it is your film camera.

Cordially

Posted on May 26, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Rebel EOS Rebel SLR film camera-pictures develop like film was exposed

The shutter is most likely damaged.

Posted on Dec 07, 2007

spotatohead
  • 95 Answers

SOURCE: Blank Film Developing

It likely did not catch when it was first loaded, and as such never advanced through the camera. Open the back of the camera, with no film in it, then set the shutter speed to 1, advance the film advance lever and take a shot. You should see the shutter curtains open and then close a second later. Then advance the film lever again and watch to see that the sprockets are turning. If they are, then the camera is exposing and the mechanics are working properly to advance the film. Chances are it was just loaded incorrectly.

Posted on Dec 10, 2008

spotatohead
  • 95 Answers

SOURCE: Canon AE-1 Dark Pictures

You my friend, need a user guide. Try this link:
http://www.lensinc.net/manuals/CanonAE-1user.pdf

Pages 23-26 will cover basic shooting. There is much to learn in the world of photography, so read the manual well and practice.

Posted on Dec 30, 2008

old marine
  • 1992 Answers

SOURCE: Film rolls back automaticaly

The camera shouldn't be doing this, assuming you're using 36 exposure (or 24 exposure) film. You may want to set a custom function to prevent automatic rewind -- you would have to rewind the film yourself by pressing the rewind button.

To do this:
1. Under the palm grip, press the 'CF' (custom function) button.
2. Use the main dial to select 'F1' in the LCD. It should show a '0' below the 'F1'.
3. Press the 'CF' button to change the '0' to a '1'.
4. Press the shutter button half way to save the change and exit the custom function setting mode.

If you want to stop the rewind with the film leader still exposed (film doesn't rewind entirely into the cannister), use the same steps but set custom function 'F2' to a value of '1'.

Posted on Mar 17, 2009

Obertelli
  • 3006 Answers

SOURCE: Have a canon T70 camera I picked up off ebay.

Completely. The shutter is badly damaged and I'll be very surprised if your fix has permanently cured it, but fingers crossed... If not, there's only one fix. Chuck the camera away (spare shutter assemblies are nearly as rare as hens' teeth/fresh **** ****) and replace it. There are loads of T-series bodies and later Canon EOS triple digit/Rebel models available for free just by asking on FreeCycle and Freegle. Note that the lens mount used on the T-series is different to the Canon Autofocus mount used on later models. Also plenty of all the other makes as well. You may have to wait and to ask a few times, but it's where I still get the majority of my 35mm film camera equipment.

Posted on May 21, 2010

Testimonial: "Thanks for the quick reply! Im going to try one more roll of film the first 5 pictures worked fine at least the camera worked and sounded good. I will see what happens when i have this roll developed. With that shutter curtin back in place like it should be. Thanks again!! Terry "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Two rolls of film developed at CVS - apparently not exposed???


it is not unknown for film developing sites to with hold good photos so take another practice roll and have it developed somewhere else
That will prove either the camera or the developer

Apr 23, 2017 | Pentax K1000 35mm SLR Camera

1 Answer

Pictures turned out with blur


Slide out the card and slide it back in firmly

Oct 20, 2013 | Canon EOS Rebel XS 35mm SLR Camera

1 Answer

I took 4 rolls of film in for development but when I got them back all of them were either very under or overexposed despite taking all the pictures according to the light meter in the viewfinder of my...


Are you looking at the picture as in a print OR are you holding the negative up to the light and looking at it that way. Don't touch the negatives, they should be in a protective sleeve but you can see through it. You should be able to see if the spacing between the frames is messed up and if you have lighter and darker negatives. Looking at a print from an automated one hour service isn't worth the time of day to determine a problem. The Pentax K1000 is the work horse of the century for students learning photography and a lot of them have seen extensive use, also the camera is quite old. What I expect is if the negatives are showing overlapping frames AND the exposure is off sometimes over and other times underexposed then the camera needs service lubrication and adjustment. It's great that the light meter is working but the shutter speed could be off and the advance is skipping giving the overlap. I don't know where you are in this world but in Canada that's a $80.00 to $120.00 fix and have the repair person change the light seals while he/she has it apart.
The Pentax K1000 is still a great camera it's up to you whether or not to spend the money. I can't tell you what to do but I can suggest that if you are going to shoot film you find some place that does it with a little more human touch. Hope this was a help

Jan 24, 2011 | Pentax K1000 35mm SLR Camera

1 Answer

I didnt use all of my film but i pressed the rewind button and when i turned it on the film rewond on its own. what do i do?


Nothing. You pressed the rewind button and the film rewound: it didn't do so "on its own", it just did what you told it to.

Get it developed and put another film in and don't make the same mistake twice.

You can buy a film leader retriever which fishes out the end of the film from the canister enabling you to reload it, but you need to remember exactly which frame you were at. To get it back to the correct position you then set the camera to fully manual and using the fastest shutter speed and smallest aperture, leave the lens cap on and cover the viewfinder and away from bright light you fire the shutter until the counter reads one lower than you were last at (if your frame counter counts down to zero shots remaining). If the subsequent shots don't register exactly with the old shots, the automatic film processing machinery will likely cut into some frames when cutting the negs into strips. You'll also find that a leader retriever costs more than another roll of film and can take some skill to use.

In summary, your Minolta 7000 is behaving exactly as designed and the cheapest fix is to just drop in a new roll of film.

Sep 20, 2010 | Minolta Maxxum 7000 35mm SLR Camera

1 Answer

Have a canon T70 camera I picked up off ebay. Loaded it with film and took a pic of my daughter. Aftrer i shoot the pic the camera did not rewind to the next frame i noticed the shutter locked up about...


Completely. The shutter is badly damaged and I'll be very surprised if your fix has permanently cured it, but fingers crossed... If not, there's only one fix. Chuck the camera away (spare shutter assemblies are nearly as rare as hens' teeth/fresh **** ****) and replace it. There are loads of T-series bodies and later Canon EOS triple digit/Rebel models available for free just by asking on FreeCycle and Freegle. Note that the lens mount used on the T-series is different to the Canon Autofocus mount used on later models. Also plenty of all the other makes as well. You may have to wait and to ask a few times, but it's where I still get the majority of my 35mm film camera equipment.

May 21, 2010 | Canon T70 35mm SLR Camera

1 Answer

Blank Film Developing


kwilson36

you should have at least 6in. of exposed film from the film canister to the take-up spool unless you loaded the film in total darkness.
open the back cover to make sure the shutter is working, reload and give it another try.

Jan 25, 2009 | Nikon N90S 35mm SLR Camera

1 Answer

Nikon fm10 35mm SLR developed pictures turn out white


That sounds like your shutter isn't opening. take the lens of and set the shutter speed to B this should keep the shutter open as long as the release is pushed down. advance one frame and hold down the shutter release while looking at the opening where the lens should be. If the shutter opens you will hear it and see the back plane where the film would sit to be exposed. I expect your shutter won't open.

Good luck
Rob

Dec 11, 2008 | Nikon FM10 35mm SLR Camera

1 Answer

2 rolls out of a 3-pack ruined.


I would suggest you buy an off-brand roll of 12 or 24 exposures. Run it through the camera taking snaps of anything -- but make sure you vary the lighting, ISO, shutter speed, aperture, etc. as you snap the pics. Don't worry too much about composition. This roll is a quick test, NOT for photos to keep.

Have the film developed and then follow-up with comments on the results. I'll gladly assist you further at that time.
Char1ieJ

Nov 11, 2008 | Nikon N65 35mm SLR Camera

1 Answer

Pictures didn't develope


Looks like you are not loading the film onto the take-up spool correctly.

Go back to the development store and ask them if they can give you a spool of waste film (e.g. one that got exposed to the light or something). Otherwise buy the cheapest film you can find.

Load the film in the camera. Take a few frames. Open the camera back up a bit, the film should have advanced. You will be able to tell this because there is more film on the takeup spool. The frames are also numbered nearby.

It might take you a few goes to get the film to load correctly. If no luck, maybe the file wind-on is broken and the camera needs repair.

Nov 05, 2007 | Nikon N65 35mm SLR Camera

2 Answers

N75 will not load film


Quick solution: force a manual rewind.
1. Remove film
2. Close camera back.
3. With the power turned on, press the two rewind buttons together. They are marked in red.
4. The camera will make a rewind sound and will stop after about 2 seconds.
5. DO NOT fire the shutter yet.
6. Put the mode on Manual and select a fast shutter speed like 1/90 sec. Any aperture will do.
7. Load the film correctly as given in the user's manual.
8. As you close the camera back, the film will prewind to the end of roll. At the end of the roll pre-wind the LCD will show you the total number of frames available.
9. Select any shooting mode.
10. Go on and take pictures.

Hope this helps

Dec 14, 2006 | Nikon N75 35mm SLR Camera

Not finding what you are looking for?
Canon EOS Rebel XS 35mm SLR Camera Logo

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Photography Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1992 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Canon Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...