Question about Marantz SR-5200 Receiver

Open Question

My SR6200 plays very low and when I select a source analog sources plays at the same time .. there is also a red speaker light on the display . can some one help me

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: marantz sr6200 problem

I think it may be related to set up of crossover frequencies within 'menu'. There's a menu where speaker sizes are set, as far as I remember the lowest setting suggested crossower freq for sub somewhere at 80hz as default which may be too high of you have sub.

Posted on Mar 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm using an onkyo tx-nr609, I have a wireless speaker adaptor plugged into zone 2 on the back next to where the subwoofer plugs in, but can't seem to get any sound to come out of it. Any ideas?


Hi Chris, not all sources will play to zone 2. Only internal and analog sources. If you want to play your cable box for example you need an analog connection from the cable box to the receiver. Also, the output is very low it needs to be amplified. Thank you, Onkyo USA

Nov 15, 2016 | Onkyo Audio Players & Recorders

1 Answer

Marantz sr6200


need more input.........
connected what ?
i'll give you a tip about optical sound.
if the socket glows red it's an output, if it doesn't then its an input.....optical sockets don't work two way, like some people seem to think.
other then that try selecting the optical channel using the source button.

Mar 18, 2014 | Audio Players & Recorders

1 Answer

My Marantz SR6200 is not playing loud and it only plays in analog and when it does and I select tuner cd or Dvd will play, there is also a little crackling on the front right speaker. please if anyone...


Hi, maybe you have speakers misconnected or speakers wiring with short circuit (joined bare cables), please check them because if this continues for a long time, your device could get damaged.

Oct 20, 2013 | Marantz SR-6200 Receiver

1 Answer

Why? no sound from the speskers at all.


There are a few things that could cause no sound and although some are obvious I'll got through them all..

1) Sound is on Minimum

2) Sound is Muted

3) No Power to Subwoofer

4) Speakers connected Incorrectly or Faulty

5) No AUDIO IN connections to TV-IN or AUX-IN

6) Incorrect Input Source is Selected (See Below)


Connecting audio from TV

When connecting the audio output from your TV to this Home Theater Audio System, you will have the sound of the

TV output on all the speakers. It will enable you to enjoy the multi-channel surround sound capabilities.


Use an audio cable (red/white - not supplied) to connect the TV IN jacks on this DVD system to the AUDIO OUT

jacks on the TV. To listen to the sound, press TV on the remote control as the sound source that you want to play.


Connecting audio from an audio/video device

This DVD system provides analog and digital audio connection. You can connect the audio output from an

audio/video device (e.g. VCR, Cable/Satellite Box) to this Home Theater Audio System in order to enjoy the

multi-channel surround sound capabilities.

Use an audio cable (red/white - not supplied) to connect the AUX IN jacks on this DVD system to the AUDIO OUT

jacks on the connected device. To listen to the sound, press AUX/DI to select "AUX" as the sound source that

you want to play.

Or

Use a coaxial cable (not supplied) to connect the DIGITAL IN jack on this DVD system to the DIGITAL OUT jack on

the connected device. To listen to the sound, press AUX/DI to select "DI" as the sound source that you want to play.


Please leave feedback

Cheers

Andy

Apr 27, 2011 | Philips HTS3450 System

2 Answers

I have connected my phillips cdr785 recorder the proper way to record from an external source and I get the message "start source" on the cdr side when trying to record. And it never starts...


If you're recording an analog source the recorder won't automatically start. You have to start it in sync with the playback.

If you're trying a synchronized digital recording...

Page 28 of the manual says

Start playback on the selected source.


The CD recorder starts to record simultaneously and recording in progress is shown. The remaining recording time left of the CDR(W) is displayed.


Note: If you start playback on the selected source within a track, recording starts at the beginning of the next track or after 2.7 seconds of silence in analogue recordings.

Mar 05, 2011 | Philips CDR785 3-Disc CD Recorder

1 Answer

Need advice on how to use Advance Digital ADS Instant Music RDX-150


Assuming you have recording software on your machine already: (GoldWave, Audacity...)

Plug the USB cable into the back of the ADS and into the computer

Connect a line-level analog audio source (tape player, turntable, radio, amplifier, etc.) to the ADS using the appropriate cable to fit the source on the one end and has RCA connectors on the other - plug into the Audio In jacks (Red and White)

Ensure that the recording source on the computer is set to the appropriate USB port

Select record in the software and start the analog source playing

Note: If you are using a microphone, make sure it is amplified to line-level before using as a source.

Jan 22, 2011 | Advance Digital ADS Instant Music RDX-150...

1 Answer

MY THEATER SYSTEM WONT PLAY MY TV THROUGH THE AUXIN


The physical TV is a 2-channel analog audio device. Think about it this way: Most high-end users use video monitors (no audio or speakers on board). So where does the TV-related audio come from....

It comes from the same place the TV would get it - cable, satellite, dvd, blu-ray, vcr...

So why run audio from any of those sources to the TV and back to the receiver (whose specialty is multi-channel sound)?

I imagine your cable or satellite box has digital and analog audio outputs. The receiver needs a digital input for anything multi-channel. Select the highest-quality one that's compatible with your HTS and use it for the audio feed.

Feb 25, 2010 | Audio Players & Recorders

2 Answers

Denon receiver AVR-3300: Unstable source selection


Go over here: http://denon.custhelp.com/cgi-bin/denon.cfg/php/enduser/std_alp.php?p_sid=1NlVrsDj

I have some Denon components myself and had some problems. Ask them here, and within a day you should have solution for this problem.

Probably you have to reset the device to factory settings.

Jul 22, 2009 | Denon AVR-3300 Receiver

2 Answers

Sony Trinirton TV and DAV-HDX 275 System


Here are a couple of the most common reasons for your problem:

Make sure you have selected the right input source on the DAV-HDX275 that your TV station source (cable, satellite, direct TV or whatever you get TV stations from) is connected to on the DAV-HDX275.

Also make sure that if you are using a digital input (HDMI, optical, or coaxial) from the TV station source, that the DAV-HDX275 in set for a digital input and on the right source.

If you are using an analog source (red and white RCA jacks) for the TV stations , make sure you do not have the digital input activated for that source on the DAV-HD275. You need to select the analog option.

You must also be sure that you have a cable, whether it is analog or digital, connected from the cable box to the DAV-HD275.

I hope this was helpful to you, it is always very important to double check all the connections and make sure the stereo is set to the right type of input (digital or analog).

If you have found this to be helpful, a good rating is always appreciated. Thanks and let me know if you need any more help.

Jun 22, 2008 | Sony BRAVIA DAV-HDX267W Theater System...

1 Answer

Denon AVR-2105


If the Cd is wired digitally, it will only play through the main zone, because the Denon cannot convert down to RCA to cater for the zone 2. If you plug RCAs from Cd to Denon, Main zone will STILL play from digital, and RCA connection will allow zone 2 to play Cd from RCA input....same with dvd, Satellite Blah blah... no stress, any nasty RCA will do if you want to try before you splash out on really costly cables...perhaps you can help me...want to run AVR 2105 with 2 speakers in zone 2, manual says cant do it - only ably to surround back or biamp...dont want either, dont have stereo yet to try it out...did you have any trouble with that?

May 26, 2008 | Denon AVR-2105 Receiver

Not finding what you are looking for?
Marantz SR-5200 Receiver Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

 Grubhead
Grubhead

Level 3 Expert

5047 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...