Question about Marantz SR5500 Receiver

Open Question

Marantz sr5500 clicking sound power problem - Marantz SR5500 Receiver

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

cyrylthewolf
  • 143 Answers

SOURCE: Problem with Marantz SR5500 Receiver

Sounds like you have an issue with your electrical circuit. Your receiver could be receiving spikes of current from the electrical wiring in your house.

Review your current electrical situation. Keep in mind that certain outlets are on the same circuit and that running multiple, high-wattage devices on the same circuit can cause issues with some of those devices. Especially when it comes to turning devices on and off.

Many devices take a sudden, rapid charge to power their circuitry the moment you turn the device on. Home audio and HVAC systems are particularly notorious for doing this. Other devices on the same circuit can sometimes suffer influxes of power flow and may either turn off or go into standby mode to protect themselves from the resulting surges.

I've lost audio systems that way... I lived in an apartment building that has wiring most likely dating back into the 40's. I once turned on a space heater on it's max 1500 watt setting and blew my Logitech Z-680 speakers. (The "BOOM" sound that emitted from my subwoofer was AMAZING. I had just blown an amp circuit. It literally exploded inside of the subwoofer. Took pics and everything.)

If you have the means to do so... You might consider re-wiring your electrical circuit. Take into consideration where you're going to run certain devices and wire the system accordingly.

In the meantime, you would want to be sure to buy a HIGH-QUALITY surge protector for the audio system. Spend a few bucks and get a GOOD one with a good warranty on it. Don't use those cheapy ones that we only really use to split the outlet. NOTHING under 1,000 joules.

My receiver sometimes locks itself like that, though. If we have a power outage or the unit is unplugged suddenly, it will keep itself in standby mode until you unplug it, press the power button a few times to discharge any current left in the capacitors and plug it back in normally. Only then will it turn on again.

Let me know what you come up with.

Cyryl

Posted on Nov 03, 2007

  • 4 Answers

SOURCE: Marantz SR5500 Owners Manual ?

An English version is available from the Marantz USA website as a PDF download.
Open the following link:
http://us.marantz.com/689.asp?category=AV&model=SR5500&go.x=11&go.y=14

Then click on the "SR5500 User Manual" link listed under the "Manuals and Documents" heading

Posted on Jan 16, 2009

dduncan774
  • 760 Answers

SOURCE: cant play ps3 digital audio through Marantz SR5500

Check to see if there are any software or firmware upgrades for your receiver and you PS3. This could be a handshaking issue that is easily corrected with an up grade.

Posted on May 02, 2012

dduncan774
  • 760 Answers

SOURCE: my antenna jack on a marantz sr5500 broke. how do i replace it and where can i find one

If you still have the connector and if your Tuners board is not broken, you can solder it back on if you are careful. If not replace the whole tuner.

Part# 90M-AV000350R

Posted on Jun 22, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My antenna jack on a marantz sr5500 broke. how do i replace it and where can i find one


If you still have the connector and if your Tuners board is not broken, you can solder it back on if you are careful. If not replace the whole tuner.

Part# 90M-AV000350R

Jun 21, 2012 | Marantz SR5500 Receiver

1 Answer

Cant play ps3 digital audio through Marantz SR5500


Check to see if there are any software or firmware upgrades for your receiver and you PS3. This could be a handshaking issue that is easily corrected with an up grade.

May 02, 2012 | Marantz Audio Players & Recorders

1 Answer

Marantz SR5500 B speaker setup problem


are all the speakers connected 1.5s
all the same watts helps
is that one with an inbuilt amp ?

what a mess or connectors at the back of one of these



Model SR5500 User Guide - Marantz

us.marantz.com/DocumentMaster/US/DFU_SR5500_Final_Eng.pdf



index-4p5wtmbbsqxcguhfujkugljq-5-0_0.jpg

des-4p5wtmbbsqxcguhfujkugljq-5-1.jpg

Apr 16, 2017 | Marantz SR5500 Receiver

1 Answer

My SR5500 from Marantz has a problem. It suddenly powers off and then a clicking sound is there. It then does not come on


HI...

Are the speakers all connected properly and set to the right pair ( A or B)?

Do any lights show on the front panel such as "Stand-by"?

Aug 16, 2010 | Marantz Audio Players & Recorders

2 Answers

I have a Marantz SR5500 and the unit will not stay powered on.


I have this problem. it is caused by an o/c mains transformer primary winding. the clicking and flashing light is the stanbyy circuit trying to switch the power on to the main (large) transformer when it gets no voltage out it switches back off

May 19, 2009 | Marantz SR5500 Receiver

1 Answer

Marantz SR5500 Owners Manual ?


An English version is available from the Marantz USA website as a PDF download.
Open the following link:
http://us.marantz.com/689.asp?category=AV&model=SR5500&go.x=11&go.y=14

Then click on the "SR5500 User Manual" link listed under the "Manuals and Documents" heading

Dec 21, 2008 | Marantz SR5500 Receiver

2 Answers

No audio


Go to amp set up menu and make sure it knows the cables you are useing,ie-if the dvd is wired with coax for sound go to input set up and tell the amp you are useing this type of cable.If this is not the problem and the sound is going off one device at a time your amp needs to go back to your dealer.
hope this helps.
CABLE GUY.

Jul 12, 2008 | Marantz SR-5600 Receiver

3 Answers

Problem with Marantz SR5500 Receiver


Sounds like you have an issue with your electrical circuit. Your receiver could be receiving spikes of current from the electrical wiring in your house.

Review your current electrical situation. Keep in mind that certain outlets are on the same circuit and that running multiple, high-wattage devices on the same circuit can cause issues with some of those devices. Especially when it comes to turning devices on and off.

Many devices take a sudden, rapid charge to power their circuitry the moment you turn the device on. Home audio and HVAC systems are particularly notorious for doing this. Other devices on the same circuit can sometimes suffer influxes of power flow and may either turn off or go into standby mode to protect themselves from the resulting surges.

I've lost audio systems that way... I lived in an apartment building that has wiring most likely dating back into the 40's. I once turned on a space heater on it's max 1500 watt setting and blew my Logitech Z-680 speakers. (The "BOOM" sound that emitted from my subwoofer was AMAZING. I had just blown an amp circuit. It literally exploded inside of the subwoofer. Took pics and everything.)

If you have the means to do so... You might consider re-wiring your electrical circuit. Take into consideration where you're going to run certain devices and wire the system accordingly.

In the meantime, you would want to be sure to buy a HIGH-QUALITY surge protector for the audio system. Spend a few bucks and get a GOOD one with a good warranty on it. Don't use those cheapy ones that we only really use to split the outlet. NOTHING under 1,000 joules.

My receiver sometimes locks itself like that, though. If we have a power outage or the unit is unplugged suddenly, it will keep itself in standby mode until you unplug it, press the power button a few times to discharge any current left in the capacitors and plug it back in normally. Only then will it turn on again.

Let me know what you come up with.

Cyryl

Nov 02, 2007 | Marantz SR5500 Receiver

Not finding what you are looking for?
Marantz SR5500 Receiver Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...