Question about Jet Tech Systems 24 in. F18DP Free-standing Dishwasher

Open Question

JET 737 DISHER WASHER. IT STARTS TO WASH THEN IT STOP TILL YOU PUSH START . HAS OR ON RINSE TEMP.

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

service161
  • 5 Answers

SOURCE: dishwasher will not stop washing

The problem is the pressostat which is part of the water level system. Either the pressostat needs adjustment or replacement. the air trap at the back of the unit in the sump area may be loose or broken, this should be inspected. refer to http://www.mvpgroupcorp.com/jettech/737_exp_view.pdf .

Posted on Mar 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Rinse cycle water temp


You may have a leaking hot water electrovalve, replace it.

Sep 06, 2016 | LG WT4870CW 27" Top Load Washer with 4.5...

1 Answer

After 20 mins water temp still not at 150 on my jet-tech 737 dushwasher.


The reason the temperature are going up is the heating system is defective. The thermostat on the booster (rinse) is not satisfied. First thing to verify is the contactor that is activated by the rinse thermostat. Often one of the wires on the contactor will burn.

Nov 20, 2013 | Jet Tech Systems 24 in. 737 Free-standing...

1 Answer

Not heating up to temp of 150 for wash cycle


The 737, like most Jet=Tech models, requires to be drain empty at least once a day. If the unit is empty and it is started, it will take approximately 30 minutes for the machine to be ready. Which means, the unit will fill and then heat up both booster tank first and then wash tank. If after all that the wash temperature is not up to 150f then the wash thermostat needs to be either calibrated or replaced if the wash element is in good condition. It is assumed here that the booster temperature is reaching 180F.
Search by part number or description Search by part number or description

Nov 20, 2013 | Jet Tech Systems 24 in. 737 Free-standing...

1 Answer

Agitator starts at begining of cycle before washer is full


Please be carful as running the agitator without enough water will overheat and kick out the motor, however it should be ok when it resets itself.
Yes, the machine should stop agitating when you lift the lid so this too is part of the problem.
After looking at the print I can only suggest that the cam contacts in the timer ( contacts 12 and 14) that start the motor are burned and stuck together.
Quentin

Sep 17, 2009 | Frigidaire FEX831CS Top Load Stacked...

1 Answer

The washer keeps filling and won't stop. Sometimes can get it to stop on the wash cycle but won't stop filling at all on the rinse cycle. Any solutions?


I get this question a lot. Washer is flooding the house, water everywhere, won't stop. The first thing I say is unplug the washer. If the water is still coming in,(which it will on a stuck valve) shut off the water faucets. If that is not possible shut the water meter off. If you can stop the washer with the timer then I would say instead of a bad valve you have a plugged water level pressure hose. Look at this diagram: water%20level%20operation.jpg As you can see the rubber tube from the bottom of the tub allows air pressure to push against the switch till it shuts down the valve and starts the wash cycle. Remedy this problem: Simply remove the tube from the switch and blow it out. Use them lungs!. Get that sand and trash out of the sump. Reconnect the hose tightly and pump out any standing water. Then restart the machine. If you have a good tight connection the machine should start working like normal. No parts needed! LOL!

Sep 12, 2009 | Maytag Performa PAV2200

2 Answers

Kenmore washing machine model 110 wash cycle stops


DOES IT DO THIS ON EVERY WASH OR SOMETIMES? IF SOMETIMES, CHECK LID SWITCH( THERE'S A LITTLE HOLE WHEN YOU OPEN THE LID, ON THE LID SHOULD HAVE A LITTLE PLASTIC PIECE THAT GOES IN THAT HOLE. THE SWITCH IS UNDER, INSIDE THAT HOLE. YOU CAN GET A PEN OR KEY TO SEE IF IT'S BROKEN.)
\
BOYNISMO@YAHOO.COM

Aug 21, 2009 | Kenmore Washing Machines

1 Answer

Dishwasher will not stop washing


The problem is the pressostat which is part of the water level system. Either the pressostat needs adjustment or replacement. the air trap at the back of the unit in the sump area may be loose or broken, this should be inspected. refer to http://www.mvpgroupcorp.com/jettech/737_exp_view.pdf .

Jan 15, 2009 | Jet Tech Systems 24 in. 737 Free-standing...

1 Answer

The washer stops before the rinse cysle


That sounds like your lid switch. This switch is located on the top. Raise the lid, Looking down at the washing machine it is the little hole. If you push it down with your finger on mine it's grey in color. The problem is that the switch is not getting pushed down far enough. if you pull it down manually with your hand a little farther you should hear it click over and the machine might scare you as it starts up into the rinse cycle. You can purchase them pretty cheap online at any applince site.

Jan 10, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Jet Tech Systems 24 in. F18DP Free-standing Dishwasher Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jet Tech Systems Dishwashers Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Brad Brown

Level 3 Expert

15441 Answers

ray gallant

Level 3 Expert

41384 Answers

Are you a Jet Tech Systems Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...